To get started with BBB and Eclipse have a look at the blog of Derek Molloy. There you can find some video tutorials like this one.
http://derekmolloy.ie/beaglebone/setting-up-eclipse-on-the-beaglebone -for-c-development/ 2014-03-09 17:59 GMT+01:00 Jack Mitchell <[email protected]>: > > > On 09/03/2014 15:41, Gibson Justian wrote: > >> Hi, >> I am new in using the Eclipse IDE and the Beaglebone Black. I >> run a debian distribution in the beaglebone black (built from Robert C >> Nelson's git )and the host machine is the debian gnu linux in Vmware , >> apparently the application is cross compiled with arm-linux-gnueabihf >> using the linaro toolchain. I have written a sample C/C++ code to flash >> the user led3 and it works perfectly. >> >> Problem: >> >> 1). How to debug the code using the FTDI cable as suggested in the SRM >> and I intend to use a gdb debugger along with eclipse to step-in the >> program and see how it works. >> >> Has anyone succeeded in setting up the debug environment in eclipse >> especially with the beaglebone black using the FTDI cable. >> >> Thanking you, >> Gibson.J >> >> > If you want to debug remotely then the easiest way to do it is through the > ethernet connection and using gdbserver. There are plenty of tutorials > online about how to do this. > > Once you have figured out how to start and connect to gdbserver, then I > would progress onto getting it working in eclipse, that is a bit harder and > requires some eclipse specific knowledge, again there will be tutorials > online if you search google. > > Good Luck! > Jack. > > > -- > For more options, visit http://beagleboard.org/discuss > --- You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
