I reran the flashing, but this time before disconnecting power I ran: dd if=/dev/mmcblk1 of=/dev/sda bs=1M to create a 1:1 copy of the files installed to eMMC on a 2G SD card.
Again the boot rom eMMC fails, but if I add the SD card and boot from it - uboot and later the OS comes up all right... So the disk-image created on the emmc is working from SD. So there must be some _other_ difference that inhibits the boot from eMMC - IMO during the pre-MLO phase... Any Ideas? Martin -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
