Can you post the whole output of the make command?
2013/12/1 jerzu <[email protected]> > Thanks for the answer! > > Yes, I have edited 'qmake.conf' file just like Trey described in his > tutorial. Everything looks correct for me, but maybe you will find some > mistake... Here is my current version of 'qmake.conf': > > # >> # qmake configuration for building with arm-linux-g++ >> # >> >> include(../../common/g++-unix.conf) >> include(../../common/linux.conf) >> include(../../common/qws.conf) >> >> # modifications to g++.conf >> # Toolchain >> >> #Compiler Flags to take advantage of the ARM architecture >> QMAKE_CFLAGS_RELEASE = -O3 -march=armv7-a -mtune=cortex-a8 -mfpu=neon >> -mfloat-abi=softfp >> QMAKE_CXXFLAGS_RELEASE = -O3 -march=armv7-a -mtune=cortex-a8 -mfpu=neon >> -mfloat-abi=softfp >> >> >> QMAKE_CC = /usr/bin/arm-linux-gnueabi-gcc >> QMAKE_CXX = /usr/bin/arm-linux-gnueabi-g++ >> QMAKE_LINK = /usr/bin/arm-linux-gnueabi-g++ >> QMAKE_LINK_SHLIB = /usr/bin/arm-linux-gnueabi-g++ >> >> # modifications to linux.conf >> QMAKE_AR = /usr/bin/arm-linux-gnueabi-ar cqs >> QMAKE_OBJCOPY = /usr/bin/arm-linux-gnueabi-objcopy >> QMAKE_STRIP = /usr/bin/arm-linux-gnueabi-strip >> >> load(qt_config) >> > > I replaced 'g++.conf' with 'g++-unix.conf'. All the paths are correct. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
