On Mon, Oct 21, 2013 at 5:00 PM, porkupan <[email protected]> wrote: > The U-Boot built from the Mainline sources doesn't seem to be able to load > the kernel. > > Here is how i built it: > git clone git://git.denx.de/u-boot.git u-boot-main > cd u-boot-main/ > git checkout --track -b omap3 origin/master > > make CROSS_COMPILE=arm-linux-gnueabihf- mrproper > make CROSS_COMPILE=arm-linux-gnueabihf- omap3_beagle_config > make CROSS_COMPILE=arm-linux-gnueabihf- > > U-Boot builds, I copied the u-boot.img into the Beagleboard xM boot SD > (U-Boot FAT partition). The SD has been made from RobertCNelson > preconfigured Ubuntu demo image, with currently operational U-Boot. The new > U-Boot fails to load the kernel image: > > U-Boot SPL 2013.07-00016-gbc15ff8 (Aug 16 2013 - 10:41:31) > OMAP SD/MMC: 0 > reading u-boot.img > reading u-boot.img > > > U-Boot 2013.10 (Oct 21 2013 - 15:03:24) > > OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 0 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - readenv() failed, using default environment > > In: serial > Out: serial > Err: serial > Beagle xM Rev C > No EEPROM on expansion board > Die ID #1c9000029ff800000163810c0d02f018 > Net: usb_ether > Hit any key to stop autoboot: 0 > mmc0 is current device > gpio: pin 173 (gpio 173) value is 0 > gpio: pin 4 (gpio 4) value is 0 > SD/MMC found on device 0 > reading uEnv.txt > 945 bytes read in 3 ms (307.6 KiB/s) > Loaded environment from uEnv.txt > Importing environment from mmc ... > Running uenvcmd ... > reading zImage > 3812504 bytes read in 239 ms (15.2 MiB/s) > reading initrd.img > 3196182 bytes read in 199 ms (15.3 MiB/s) > reading /dtbs/omap3-beagle-xm.dtb > 13511 bytes read in 8 ms (1.6 MiB/s) > ## Error: "expansion_args" not defined > Kernel image @ 0x80300000 [ 0x000000 - 0x3a2c98 ] > Wrong Ramdisk Image Format > Ramdisk image is corrupt or invalid > ** File not found /boot/uImage ** > Booting from nand ... > > no devices available > Wrong Image Format for bootm command > ERROR: can't get kernel image! > ** File not found /boot/zImage ** > OMAP3 beagleboard.org # > > Is there a working U-Boot source/build environment available? Or patches to > build the mainline U-Boot? >
Please don't mix and match source/guide's etc.. It's pain to support.. http://eewiki.net/display/linuxonarm/BeagleBoard Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
