Hi Otto, Mainly the changes in mtx-changer are in the following commit https://github.com/bareos/bareos/commit/68710b7960 We remove the perl usage in favor of awk and a few cleanup. But nothing in terms of usage should have changed.
What might have been happened, is that you touch previous version (check also mtx-changer.conf) which would have not been upgraded by the installation package. Would you mind to check this ? Regards On Wednesday, 19 March 2025 at 20:22:44 UTC+1 Otto Brandstaetter wrote: > Hi, I have been using bareos with different hardware since several years - > and I have some scripts, for example to re-initialize tapes. > > In the past I used for example /usr/lib/bareos/scripts/mtx-changer > /dev/sch0 load 8 /dev/tape/by-id/sch0-nst 0 after execution, the next > command in the script was executed. > > But since somewhen (last year?) after execution the script shows done, but > does not exit. Seems to be hardware-independant as I tried with a dell > changer and a hpe changer. > > I am working on debian 12 with (now) bareos 24, installed it using apt > from download.bareos.org/current/Debian_12 > Any help would be appreciated as I could not find anything regarding > this... > Cheers, Otto > -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to bareos-users+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/bareos-users/ae320f79-c6b5-40f0-94c6-96d5e4329cedn%40googlegroups.com.
