Hi Christian, while I have no idea about what's happening in your case, You might want to try to run the job with debug level set to 200 on all component. Maybe the trace will reveal more.
You can start debug just before the job and stop it after setdebug level=200 trace=1 timestamp=1 all Documentation reference https://docs.bareos.org/TasksAndConcepts/BareosConsole.html#bcommandsetdebug On Sunday, 16 March 2025 at 22:34:34 UTC+1 Christian Tardif wrote: > Hello. > > Kind of makes no real sense to me, but I've tested diligently. I have one > of my Windows 11 workstations that keeps losing network access during its > backup. I've validated that this wasn't just an illusion by disabling its > backup. Doing so, the workstation doesn't lose access to the network > anymore. > > If I try to perform a manual backup (unscheduled I mean), the workstation > loses access to the network on every occasion after a certain amount of > time. > > I have disabled Firewall on the workstation to make sure it wasn't a side > effect of it, but the network keeps dropping. I'm kind of out of > options..... > > Does that rings a bell, anyone? > > Workstation fd client is 24.0.2~pre41.988426cda > Director version is 23.0.1~pre7.606b211eb > > Windows version is Windows 11 Professionnal > -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to bareos-users+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/bareos-users/3fae19a2-3669-456e-bbb3-4ac8eca9b8den%40googlegroups.com.
