Sorry for not expressing my point fully. I still don't know how to convey 
the meaning correctly...
The data obtained during the execution of one job must be written to two 
tapes in parallel.
In this configuration, data is written to a single tape. But it is 
necessary that the data be simultaneously duplicated on the second tape.
It is possible to run a second job to write to a second tape, but in this 
case the "RunBeforeJob" script is executed, and only after it has been 
executed will the backup data appear.


Job {
  Name = "ORA_Backup-job"
  Type = Backup
  Client = vm-holt-ora03-fd
  Description = "Backup ORA database"
  Level = Full
  FileSet = "ora_corebt"
  RunBeforeJob = "/home/oracle/scripts/rman_backup_corebt.sh"
  RunScript {
  FailJobOnError = Yes
  RunsOnClient = Yes
  RunsWhen = Before
  Command = "sudo su - oracle -c /home/oracle/scripts/rman_backup_corebt.sh"
}
# RunAfterJob = "sudo /bin/su - oracle -c 
/opt/oraappl/scripts/stop-backup-mode.sh"
  Storage = TapeLibrary
  Messages = Standard
  Pool = ORA_DB
  SpoolData = yes
  Priority = 12
  Write Bootstrap = "/var/lib/bareos/%c.bsr"
  Full Backup Pool = ORA_DB                 
}

FileSet {
  Name = "ora_corebt"
    Include {
    Options {
      Signature = MD5
      Compression = LZ4
    }
     File = ""/backup/corebt/full_backup_corebt.tar.gz"
  }
}

Pool {
  Name = Full-corebt
  Pool Type = Backup
  Recycle = yes
  AutoPrune = yes
  Volume Retention = 23h
  Action On Purge = Truncate
 #Use Volume Once = yes
 #Maximum Volume Bytes = 100G
  Maximum Volumes = 3
  Maximum Volume Jobs = 1
   Label Format = "${Pool}"
}

*/etc/bareos/bareos-dir.d/storage*

Storage {
  Name = TapeLibrary
  Address  = 10.64.118.172
  Password = "LhEbHl35nvQyUnYqcenMs/ECUpIDmtlW+NbECHorrITE"
  Maximum Concurrent Jobs = 100
  Device = autochanger-0
  Media Type = LTO-8
  Auto Changer = yes
  TLS Enable = no
  TLS Require = no
}

*/etc/bareos/bareos-sd.d/autochanger/autochanger-0.conf*

Autochanger {
  Name = "autochanger-0"  
  Changer Device = /dev/tape/by-id/scsi-350014380272e92ac-changer           
     
  Device = tapedrive-0
  Device = tapedrive-1
  Changer Command = "/usr/lib/bareos/scripts/mtx-changer %c %o %S %a %d"

}

*/etc/bareos/bareos-sd.d/device/tapedrive-0.conf*

Device {
    Name = "*tapedrive-0*"
    DeviceType = tape
    DriveIndex = 0
    ArchiveDevice = /dev/tape/by-id/scsi-350014380272e92ad-nst 
    MediaType = LTO-8
    AutoChanger = yes                      
    AutomaticMount = yes
    Label Media = yes
    Maximum Concurrent Jobs = 100
    Maximum File Size = 24GB                 
    AlwaysOpen = yes
    Maximum Spool Size = 200G
    Maximum Changer Wait = 600
    Maximum Rewind Wait = 600
    Maximum Open Wait = 600
    Spool Directory = /mnt/backups/spool
    Maximum Block Size = 1048576
 }

*/etc/bareos/bareos-sd.d/device/tapedrive-1.conf*

Device {
    Name = "*tapedrive-1*"
    DeviceType = tape
    DriveIndex = 0
    ArchiveDevice = /dev/tape/by-id/scsi-350014380272e92b0-nst 
    MediaType = LTO-8
    AutoChanger = yes                      
    AutomaticMount = yes
    Label Media = yes
    Maximum Concurrent Jobs = 100
    Maximum File Size = 24GB                 
    AlwaysOpen = yes
    Maximum Spool Size = 200G
    Maximum Changer Wait = 600
    Maximum Rewind Wait = 600
    Maximum Open Wait = 600
    Spool Directory = /mnt/backups/spool
    Maximum Block Size = 1048576
 }
среда, 9 августа 2023 г. в 13:39:46 UTC+6, Philipp Storz: 

> Hello Ramil,
>
> Am 09.08.23 um 05:40 schrieb Ramil:
> > Can I set up parallel recording on two tapes in one job?That is, not in 
> two different jobs.
> No, this is not possible.
>
> It is
> > in one job, because run "before" and "after" scripts.
>
> I don't understand what you want to say here, sorry.
>
> Best regards,
>
> Philipp
>
> -- 
> Mit freundlichen Grüßen
>
> Philipp Storz philip...@bareos.com
> Bareos GmbH & Co. KG Phone: +49 221 63 06 93-92 <+49%20221%2063069392>
> http://www.bareos.com Fax: +49 221 63 06 93-10 <+49%20221%2063069310>
>
> Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646
> Geschäftsführer: Stephan Dühr, J. Steffens, P. Storz
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to bareos-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/bareos-users/dc087395-57c6-41e1-b739-3fceb86848c5n%40googlegroups.com.

Reply via email to