Bareos uses a script called mtx-changer (probably located in /usr/lib/bareos/scripts) which in turn calls mtx. You can check mtx-changer log (/var/log/bareos/mtx.log) and/or try to manually run mtx manually to see if mtx itself runs ok.
On Sunday, February 21, 2021 at 6:38:31 PM UTC+1 tilmang...@googlemail.com wrote: > Dear all, > > I have ADIC DDS Tape library which no longer cleaner removes the tape from > the library. When I issue an umount command, I get an error message. With > an older version of bareos, it used to work. Any advice on how I can debug > and fix this? > > > umount storage=TapeStorage1 > Automatically selected Catalog: QtronCatalog > Using Catalog "QtronCatalog" > Connecting to Storage daemon TapeStorage1 at qtron.fritz.box:9103 ... > 3307 Issuing autochanger "unload slot 8, drive 0" command. > 3995 Bad autochanger "unload slot 8, drive 0": ERR=Child died from signal > 15: Termination > Results=Program killed by BAREOS (timeout) > > 3002 Device ""TapeDrive1" (/dev/nst0)" unmounted > > Thanks > Tilman > -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to bareos-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/bareos-users/ca867db5-6f12-4282-bdb6-93820e7c6c69n%40googlegroups.com.
