Hi Birgit,
I checked multiple times on name matching and I also aligned my setup on your
config:
Device {
Name = My-LTO
Drive Index = 0
Media Type = Tape
Archive Device = /dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst
LabelMedia = yes
AutomaticMount = yes
AlwaysOpen = no
RemovableMedia = yes
RandomAccess = no
Spool Directory = /srv/data0/backup/spool
Maximum Spool Size = 20G
Maximum Concurrent Jobs = 1
}
Storage {
Name = LTO
Address = 192.168.0.254
SDPort = 9103
Password = $PASS
Device = My-LTO
Media Type = Tape
Maximum Concurrent Jobs = 1
AutoChanger = no
}
but I'm always ending up with an error message by requesting a simple mount in
bconsole:
Connecting to Storage daemon LTO at 192.168.0.254:9103 ...
stored/dev.cc:245 /dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst has an
unknown device type 2
Device "My-LTO" requested by DIR could not be opened or does not exist.
3999 Device My-LTO not found or could not be opened.
Thanks and best regards,
Robert
Am 19.12.20 um 18:02 schrieb DUCARROZ Birgit:
Hi Robert,
I'm not using Bareos 20, and I see the config file is a bit different,
but did you check if everything it is ok with the spaces between the =
and also within the denominations?
For example "MediaType = Tape" or "Media Type = Tape"
(my config from version 18.2):
Device {
Name = LTO7-Tape-Drive
Drive Index = 0
Media Type = Tape
Archive Device = /dev/tape/by-id/scsi-xxxxx-nst
LabelMedia = yes;
AutomaticMount = yes;
RemovableMedia = yes;
AlwaysOpen = no;
RandomAccess = no;
#Spool Directory = $SPOOLDIR
Maximum Concurrent Jobs = 1
}
Storage {
Name = Tape
Address = $HOSTNAME
SDPort = 9103
Password = $DIRPASS
Device = LTO7-Tape-Drive
Maximum Concurrent Jobs = 1
Media Type = Tape
Autochanger = no
}
Other point: Did you check that "Media Type" in Device matches with
"Media Type" in Storage and also that "Name" in Device matches with
"Device =" in Storage?
And what about the SDPort?
What happens if you comment out DeviceType?
Other point: I see you use /dev/st0. What happens if you use /dev/nst0,
which seems be scsi-1391028290-nst in your case
?
Regards,
Birgit
On 19/12/20 10:58, Robert@yahoomail wrote:
Hi Birgit,
thanks for your quick reply. I forgot to mention, that a simple
tar cvf /dev/nst0 <file>
and also a
tar cvf /dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst <file>
is working without any issue. But anyway, here are the answers to your
questions:
1)
[email protected]:~# ll /dev/tape/by-id/
total 0
lrwxrwxrwx 1 root root 9 Dez 19 10:26 scsi-1391028290 -> ../../st0
lrwxrwxrwx 1 root root 10 Dez 19 10:26 scsi-1391028290-nst -> ../../nst0
lrwxrwxrwx 1 root root 9 Dez 19 10:26 scsi-1IBM_ULTRIUM-TD1_1391028290
-> ../../st0
lrwxrwxrwx 1 root root 10 Dez 19 10:26
scsi-1IBM_ULTRIUM-TD1_1391028290-nst -> ../../nst0
2)
ITDT tool is not installed and as already said, the tar commands
directly addressing the LTO tape
are working without any issue. The same drive was also working flawless
with previous Ubuntu 16.04
and Bareos 19.2.
3)
[email protected]:~# lsscsi -g
[7:0:3:0] tape IBM ULTRIUM-TD1 4561 /dev/st0 /dev/sg10
[email protected]:~# mt -f /dev/st0 status
drive type = 114
drive status = 1073742848
sense key error = 0
residue count = 0
file number = 0
block number = 0
[email protected]:~# /bin/mt -f
/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst eject
ejects the tape as expected
Hope this helps for further analysis.
Many thanks and best regards,
Robert
Am 18.12.20 um 20:12 schrieb 'DUCARROZ Birgit' via bareos-users:
Hi,
what can you see when trying
cat /dev/tape/by-id/
?
Do you have ITDT tool installed? Can you try to check the LTO with
/opt/ITDT_LINUX/ITDT/itdt
U
1
?
What's the output of the following commands:
lsscsi -g
mt -f /dev/st0 status
/bin/mt -f /dev/tape/by-id/scsi-xxxxxxx-nst eject
?
Regards,
Birgit
On 18/12/20 18:35, 'Robert' via bareos-users wrote:
Hi everybody,
I used previous versions of Bareos on my Ubuntu server (16.04)
installation and was quite happy with
it. In summer I moved to new Ubuntu 20.04 and was desperately waiting
for an appropriate update of
Bareos - until yesterday.
I installed the fresh Bareos 20 release w/o any issue and migrated my
working /etc/bareos setup to my new server
but everytime the connected LTO was tried to be accessed I get the
following error message:
Connecting to Storage daemon LTO at 192.168.0.254:9103 ...
stored/dev.cc:245 /dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst
has an unknown device type 2
Device "My-LTO" requested by DIR could not be opened or does
not exist.
3999 Device My-LTO not found or could not be opened.
I checked on equal Name/Device and MediaType settings of the director
and the storage daemon.
Here's my SD LTO device config:
Device {
Name = My-LTO
DeviceType = Tape
MediaType = LTO-1
Archive Device = /dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst
AutomaticMount = yes
AlwaysOpen = yes
RemovableMedia = yes
RandomAccess = no
AutoChanger = no
Spool Directory = /srv/data0/backup/spool
Maximum Spool Size = 20G
}
Currently I'm running out of ideas what's going on here and I appreciate
any help to solve that issue.
Many thanks in advance and best regards,
Robert
--
You received this message because you are subscribed to the Google
Groups "bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/bareos-users/1981989980.1272466.1608312934143%40mail.yahoo.com
<https://groups.google.com/d/msgid/bareos-users/1981989980.1272466.1608312934143%40mail.yahoo.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/bareos-users/750661d8-c2e2-64fc-3bbb-7633eb6c7824%40yahoo.de.
