Hello, pon., 5 sie 2024 o 18:42 Dr. Thorsten Brandau <thorsten.bran...@brace.de> napisał(a):
> Hi Rob, > > I updated the slots. THEN (yes, yes, shame on me) I checked the messages. > In my email below I reacted to an error messages via email... It seems as > there was a time out when loading the tape, which was recovered by after > some time: > > > 05-Aug 16:09 -sd JobId 908: 3305 Autochanger "load Volume 000023L9, Slot > 17, Drive 0", status is OK. > 05-Aug 16:09 -sd JobId 908: Warning: mount.c:216 Open of Tape device > "LTO9-1" (/dev/nst0) Volume "000023L9" failed: ERR=tape_dev.c:169 Unable to > open device "LTO9-1" ( > /dev/nst0): ERR=Eingabe-/Ausgabefehler > ... > Still confused about the error message, but it seems as there are some > self-healing capabilities involved. > Most probably it is a LTO9 calibration phase. -- Radosław Korzeniewski rados...@korzeniewski.net
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
