Oops - typo in my message. It should be

*Set storage resource 'FDStorageAddress=<public FQDN of DIR/SD host>'

Which is what actually have but wrote it here wrong.☹️

I'm not aware of NAT reflection being set in the router; no such option
that I can find. I can't see sending local backup data out and back is an
issue since the data is encrypted but anyway it's set up now as you
suggested so moot.

-Chris-

On Thu, 27 Jun 2024, 15:19 Bill Arlofski, <w...@protonmail.com> wrote:

> On 6/27/24 2:54 AM, Chris Wilkinson wrote:
> > I made the additional changes you suggested.
> >
> > *Removed FD port open on remote router
> > *Set storage resource 'Address=<local address of SD host>'
> > *Set storage resource 'FDStorageAddress=<public FQDN of remote site>'
> >
> > I re-tested local and remote backups and these seem to be working fine.
>
> Excellent! \o/
>
> Next up.... Client Initiated Backups!   heh
>
>
> > These changes were not absolutely required as local backups continued to
> work when I had storage resource 'Address=<public
> > FQDN of remote site>' and without the 'FDStorageAddress=' directive. I
> presume this was because I had opened ports 9101-9103
> > to the DIR/SD host on the local router as part of my previous attempts
> and I haven't undone any of them.
>
> I didn't say it yesterday, but I was suspecting that if local and remote
> FD -> SD connections for backups were all still
> working after you set the Storage's Address to the external IP of the
> firewall, then it mu
> st be that NAT reflection was
> set/enabled on your firewall.
>
> Yes sure, that will work, but do you really want all of your backup data
> traversing your firewall? :)
>
>
> > Thanks for your help
> >
> > -Chris-
>
> You're welcome!
>
> I am glad that my curiosity to set this exact configuration up last week
> (for fun) was well timed.  :)
>
>
> Best regards,
> Bill
>
> --
> Bill Arlofski
> w...@protonmail.com
>
>
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to