> On 24. May 2022, at 16:40, Justin Case <jus7inc...@gmail.com> wrote: > > Hi there, > > in my setup I call internal drives connected by SATA “Tier 1”, and external > drives connected by USB “Tier 2”. > I have separate pools for jobs that write to tier 1 and for jobs that write > to tier 2. > Each given pool contains only volumes stored on 1 tier, so each pool is > either a tier pool or a tier 2 pool, but never both. > > For Tier 1 I have a working autochanger that created volumes in the pools > that I use for tier 1 (only). > > For Tier 2 I have another autochanger that is supposed to create volumes in > the pooks that i use for tier 2 (only), but it doesn’t do that. It gives me: > The job needs media. Please mount volume unraid-libvirt-full-tier2-vol-0543 > or label a new one for storage: "Tier2-FileChgr1-Dev1" (/mnt/tier2-01), pool: > unraid-libvirt-full-tier2, media type: tier2-ext-usb1-folder1-file. > > Any chance to get this to work?
Actually the definitions and setup in Bacula works fine. The problem was that the external USB drives were not writeable due to unknown reasons. After reformatting and setting up the folder structure all worked fine. I am sorry if someone spent a lot of time reading my setup and scratched their heads where the problem may be. All the best J/C _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
