Hi folks,
Answering my own question. Installing bacula 9.2.2 solved this problem.
Best regards,
Peter
On 2021-05-01 15:05, Peter Milesson wrote:
Hi folks,
When running monthly full backup on a Linux server, the following
error occurred in the final steps of the backup process, when
despooling attributes. Previous log entry was: Sending spooled attrs
to the Director. Despooling 180,651,607 bytes ...
Fatal error: catreq.c:751 fread attr spool error. Wanted 1478509141
bytes, maximum permitted 10000000 bytes
It has been reported previously in this list on 15 February 2021,
without any obvious solution.
The number of backed up files are 576,816, and the backup size is
1,024,746,654,774 (1.024 TB).
Both the backup server and client runs Bacula 9.0.6, and both with OS
CentOS 7.8. This is the first time I have seen this message since I
installed the system 4 years ago.
There is plenty of space in the spool directory, plenty of RAM, the
data is directly written to virtual tapes (mhvtl) without data
spooling, and there is no line compression, as the network connection
is 10Gbits/s, with the bottleneck being the disk subsystem on the
backup server (RAID10).
Suggestions are very welcome.
Best regards,
Peter
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users