Yes, brand new tapes.
Same error for all four I've added.
I've already written to and read from one of them and everything appears
to be fine.
On 25/09/19 09:12, Radosław Korzeniewski wrote:
Hello,
pt., 20 wrz 2019 o 10:46 Adam Weremczuk <ad...@matrixscience.com
<mailto:ad...@matrixscience.com>> napisał(a):
Hi all,
bconsole
*label
Automatically selected Storage: bacula_sd_lto
Enter new Volume name: LTO-W20190920A
Defined Pools:
1: lto_specials_pool
2: lto_test_pool
3: lto_weekly_pool
4: lto_monthly_pool
5: lto_archive_pool
Select the Pool (1-5): 3
Connecting to Storage daemon bacula_sd_lto at bacula:9103 ...
Sending label command for Volume "LTO-W20190920A" Slot 0 ...
*block.c:1001 Read error on fd=5 at file:blk 0:0 on device
"Quantum LTO-4 HH" (/dev/nst0). ERR=Input/output error.*
3000 OK label. VolBytes=64512 DVD=0 Volume="LTO-W20190920A"
Device="Quantum LTO-4 HH" (/dev/nst0)
Catalog record for Volume "LTO-W20190920A", Slot 0 successfully
created.
Requesting to mount Quantum LTO-4 HH ...
3001 Mounted Volume: LTO-W20190920A
3001 Device ""Quantum LTO-4 HH" (/dev/nst0)" is mounted with
Volume "LTO-W20190920A"
I haven't done much labeling but can't recall seeing this error
before.
Can it be safely ignored?
Did you use a fresh and never written tapes? If yes then you can
ignore it.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net <mailto:rados...@korzeniewski.net>
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
