Hello,
Migration problem fixed with last 9.4.4 update.
I have one last question about the pool and cartridges :
I have a LTO 6 Drive and LTO 5/6 cartridges.
Can I mix cartridge LTO 5 and 6 in the same pool ? Even if I specified
Media Type = LTO-6
in the storage ressource ?
Or should I create a new pool for LTO-5 cartridges ? : /
Thank you
Best regards
Le ven. 21 juin 2019 à 16:13, Frédéric F. <cipher1...@gmail.com> a écrit :
> Hello,
>
> I have some migrations problems when I have to change the media (LTO-6)
> after a running migration job.
> The job is waiting for an available media.
> So I mount it, and the job resumes until a fatal error (network send error
> to FS : broken pipe).
>
> So I tried to configure ResheduleOnError option like this :
>
> Job {
> Name = "Migration LTO_011_L"
> JobDefs = "MGTion_LTO_L"
> Client = "l011-fd"
> FileSet = "F L_011"
> Priority = "9"
> RunBeforeJob = "/opt/bacula/mount.sh"
> Selection Type = SQLQuery
> Selection Pattern = "SELECT Jobid FROM public.job Where name='Backup
> L_011' and (level='D' or level='F') and Type='B' and jobfiles>0 and poolid
> =2;"
> RescheduleOnError = yes
> #RescheduleInterval = 1800
> RescheduleTimes = 2
> }
>
> and the JobDefs
>
> JobDefs {
> Name = "MGTion_LTO_L"
> Type = Migrate # main.pdf-P293 However, certain such as the Level,
> Client, and FileSet, though they must be de ned, are ignored by the
> Migration job because the values from the original job used instead.
> Level = Full
> Messages = Standard
> Pool = File
> Schedule = "Tape-LTO_F"
> Next Pool = L
> MaxRunSchedTime = 1 day
> Allow Mixed Priority = yes
> Maximum Concurrent Jobs = 1
> Prefer Mounted Volumes = Yes
> #Allow Duplicate Jobs = No
> #Cancel Running Duplicates = Yes
> #Cancel Queued Duplicates = Yes
> }
>
> But it doesn't work, I don't have any reschedule of the job.
> If I rerun the migration with an available media, the job is successfull.
> Does this option deals with migration job or not ?
>
> I have another question on media type.
> I readed in the main manual :
>
> " Each Pool into which you migrate Jobs or Volumes must contain Volumes
> of only one Media Type "
>
> I have a LTO 6 Drive and cartridge 5/6.
> Can I mix cartridge LTO 5 and 6 in the same pool ? Even if I specified
> Media Type = LTO-6
> in the storage ressource ?
>
> Thank you
>
> Best regards
>
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
