I've managed to repeat it now. Please try the patch wait-without-sd-client-heartbeat.patch attached to <https://bugs.bacula.org/view.php?id=2476>.
__Martin >>>>> On Fri, 10 May 2019 21:51:23 +0200, Andras Horvai said: > > Hi Martin, > > thanks for the deep explanation! Sure I can test it... I am not sure how > fast I can give feedback... depends how fast the LTO tapes fill. > > Thanks again, > > Andras > > On Fri, May 10, 2019 at 5:57 PM Martin Simmons <mar...@lispworks.com> wrote: > > > You can get "Connection reset by peer" on Linux even within a single > > process > > as follows: > > > > 0. Suppose A and B are two file descriptors connected by a socket. > > > > 1. Write a byte to A. > > > > 2. Close B. > > > > 3. Read a byte from A. This fails with "Connection reset by peer" rather > > than > > getting EOF. You do get EOF if you omit step 1. > > > > There might be other related situations. > > > > > > I'm not 100% sure how this happens in Bacula, but it might be something > > like: > > > > 0. The reading SD and writing SD threads are connected by a socket. > > > > 1. The writing SD wants a new tape, so it calls wait_for_sysop. > > > > 1a. This calls jcr->file_bsock->signal(BNET_HEARTBEAT), which writes a > > byte to > > the socket. > > > > 1b. The new tape is loaded and wait_for_sysop returns. > > > > 1c. The writing SD continues its loop in do_append_data, reading from the > > socket. > > > > 2. The reading SD reaches the end of the old data and closes the socket. > > > > 3. The writing SD is still reading in do_append_data and so gets > > "Connection > > reset by peer". > > > > As you say, waiting for a new Volume is not unusual, but the difference is > > that I think nothing wil read the BNET_HEARTBEAT in a Copy job. For a > > Backup > > job, the FD (acting as the reading SD above) doesn't close the socket > > until it > > has synchronized with the writing SD. > > > > I have no way to reproduce this, but the theory could be tested if Andras > > can > > run a patched SD with wait_for_sysop changed to skip the heartbeat when > > running a Copy job. > > > > __Martin > > > > > > > > >>>>> On Fri, 10 May 2019 14:55:53 +0200, Kern Sibbald said: > > > > > > Hello Martin, > > > > > > This is an interesting reflection. Do you think it is a timeout, or an > > > out and out bug where Bacula gets confused with additional > > > communications? A bug would be a bit hard to understand, because the > > > SD often waits for a Volume to be mounted -- of course, there can > > > certainly be bug for a copy job where two separate Volumes are involved. > > > > > > Do you have any way to easily reproduce this? > > > > > > Best regards, > > > Kern > > > > > > On 5/10/19 1:25 PM, Martin Simmons wrote: > > > > I'm pretty sure the "Connection reset by peer" error is a Bacula bug, > > > > triggered when a Copy job waits in the middle for a new tape to write. > > > > > > > > This is causing the Copying Error status. > > > > > > > > __Martin > > > > > > > > > > > > > > > >>>>>> On Fri, 10 May 2019 00:19:54 +0200, Andras Horvai said: > > > >> hi, > > > >> > > > >> anybody, any idea regarding this error? Why the termination status of > > the > > > >> previous job was: *** Copying Error *** ? > > > >> > > > >> Thanks, > > > >> > > > >> Andras > > > >> > > > >> On Wed, May 8, 2019 at 4:11 PM Andras Horvai <andras.hor...@gmail.com > > > > > > >> wrote: > > > >> > > > >>> you got the point, here it is another error message: > > > >>> > > > >>> 06-May 12:01 backup2-dir JobId 1038: Using Device "LTO-6" to write. > > > >>> 06-May 12:07 backup2-sd JobId 1038: [SI0202] End of Volume > > "WORMW-1181" at > > > >>> 1424:28456 on device "LTO-6" (/dev/nst0). Write of 64512 bytes got > > -1. > > > >>> 06-May 12:07 backup2-sd JobId 1038: Re-read of last block succeeded. > > > >>> 06-May 12:07 backup2-sd JobId 1038: End of medium on Volume > > "WORMW-1181" > > > >>> Bytes=2,820,363,420,672 Blocks=43,718,430 at 06-May-2019 12:07. > > > >>> 06-May 12:08 backup2-dir JobId 1038: Created new Volume="WORMW-1182", > > > >>> Pool="TapeArchive", MediaType="LTO-6" in catalog. > > > >>> 06-May 12:08 backup2-sd JobId 1038: Please mount append Volume > > > >>> "WORMW-1182" or label a new one for: > > > >>> Job: srv1-job.2019-05-06_09.00.01_21 > > > >>> Storage: "LTO-6" (/dev/nst0) > > > >>> Pool: TapeArchive > > > >>> Media type: LTO-6 > > > >>> 06-May 12:46 backup2-sd JobId 1038: Error: [SE0203] The > > Volume=WORMW-1182 > > > >>> on device="LTO-6" (/dev/nst0) appears to be unlabeled. > > > >>> 06-May 12:47 backup2-sd JobId 1038: Labeled new Volume "WORMW-1182" > > on > > > >>> Tape device "LTO-6" (/dev/nst0). > > > >>> 06-May 12:47 backup2-sd JobId 1038: Wrote label to prelabeled Volume > > > >>> "WORMW-1182" on Tape device "LTO-6" (/dev/nst0) > > > >>> 06-May 12:47 backup2-sd JobId 1038: New volume "WORMW-1182" mounted > > on > > > >>> device "LTO-6" (/dev/nst0) at 06-May-2019 12:47. > > > >>> 06-May 12:56 backup2-sd JobId 1038: Fatal error: append.c:170 Error > > > >>> reading data header from FD. n=-2 msglen=0 ERR=Connection reset by > > peer > > > >>> 06-May 12:56 backup2-sd JobId 1038: Elapsed time=00:14:48, Transfer > > > >>> rate=68.06 M Bytes/second > > > >>> 06-May 12:56 backup2-sd JobId 1038: Sending spooled attrs to the > > Director. > > > >>> Despooling 27,981,780 bytes ... > > > >>> > > > >>> so why I got Connection reset by peer message? SD,FD,Director is on > > the > > > >>> same machine (in the case of Copy jobs) > > > >>> > > > >>> Thanks, > > > >>> Andras > > > >>> > > > >>> On Wed, May 8, 2019 at 3:10 PM Martin Simmons <mar...@lispworks.com> > > > >>> wrote: > > > >>> > > > >>>> That look clean. > > > >>>> > > > >>>> Are there any messages for the "New Backup JobId" (1038)? I find > > them > > > >>>> printed > > > >>>> after the "Termination:" line for the copy job. > > > >>>> > > > >>>> __Martin > > > >>>> > > > >>>> > > > >>>>>>>>> On Wed, 8 May 2019 14:32:31 +0200, Andras Horvai said: > > >>>>> hi, > > > >>>>> > > >>>>> here is the snipped part: :) > > > >>>>> > > >>>>> 06-May 09:00 backup2-dir JobId 1037: Copying using JobId=1016 > > >>>>> Job=srv1-job.2019-05-04_02.00.00_59 > > >>>>> 06-May 12:01 backup2-dir JobId 1037: Start Copying JobId 1037, > > >>>>> Job=ArchiveJob.2019-05-06_09.00.01_20 > > >>>>> 06-May 12:01 backup2-dir JobId 1037: Using Device "FileStorage" to > > read. > > >>>>> 06-May 12:01 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1006" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:01 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1006" > > > >>>> to > > >>>>> addr=531212699 > > >>>>> 06-May 12:01 backup2-sd JobId 1037: End of Volume "FILEW-1006" at > > >>>>> addr=2147431799 on device "FileStorage" (/backup). > > >>>>> 06-May 12:01 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1007" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:01 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1007" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:02 backup2-sd JobId 1037: End of Volume "FILEW-1007" at > > >>>>> addr=2147475513 on device "FileStorage" (/backup). > > >>>>> 06-May 12:02 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1008" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:02 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1008" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:02 backup2-sd JobId 1037: End of Volume "FILEW-1008" at > > >>>>> addr=2147475637 on device "FileStorage" (/backup). > > >>>>> 06-May 12:02 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1009" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:02 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1009" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:03 backup2-sd JobId 1037: End of Volume "FILEW-1009" at > > >>>>> addr=2147475644 on device "FileStorage" (/backup). > > >>>>> 06-May 12:03 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1010" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:03 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1010" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:03 backup2-sd JobId 1037: End of Volume "FILEW-1010" at > > >>>>> addr=2147475667 on device "FileStorage" (/backup). > > >>>>> 06-May 12:03 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1011" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:03 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1011" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:04 backup2-sd JobId 1037: End of Volume "FILEW-1011" at > > >>>>> addr=2147475655 on device "FileStorage" (/backup). > > >>>>> 06-May 12:04 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1012" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:04 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1012" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:05 backup2-sd JobId 1037: End of Volume "FILEW-1012" at > > >>>>> addr=2147475652 on device "FileStorage" (/backup). > > >>>>> 06-May 12:05 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1013" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:05 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1013" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:05 backup2-sd JobId 1037: End of Volume "FILEW-1013" at > > >>>>> addr=2147475669 on device "FileStorage" (/backup). > > >>>>> 06-May 12:05 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1014" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:05 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1014" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:05 backup2-sd JobId 1037: End of Volume "FILEW-1014" at > > >>>>> addr=2147475654 on device "FileStorage" (/backup). > > >>>>> 06-May 12:05 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1015" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:05 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1015" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:06 backup2-sd JobId 1037: End of Volume "FILEW-1015" at > > >>>>> addr=2147475661 on device "FileStorage" (/backup). > > >>>>> 06-May 12:06 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1016" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:06 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1016" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:06 backup2-sd JobId 1037: End of Volume "FILEW-1016" at > > >>>>> addr=2147475671 on device "FileStorage" (/backup). > > >>>>> 06-May 12:06 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1017" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:06 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1017" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:07 backup2-sd JobId 1037: End of Volume "FILEW-1017" at > > >>>>> addr=2147475664 on device "FileStorage" (/backup). > > >>>>> 06-May 12:07 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1018" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:07 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1018" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:47 backup2-sd JobId 1037: End of Volume "FILEW-1018" at > > >>>>> addr=2147475651 on device "FileStorage" (/backup). > > >>>>> 06-May 12:47 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1019" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:47 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1019" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:48 backup2-sd JobId 1037: End of Volume "FILEW-1019" at > > >>>>> addr=2147475672 on device "FileStorage" (/backup). > > >>>>> 06-May 12:48 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1020" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:48 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1020" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:49 backup2-sd JobId 1037: End of Volume "FILEW-1020" at > > >>>>> addr=2147475677 on device "FileStorage" (/backup). > > >>>>> 06-May 12:49 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1021" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:49 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1021" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:49 backup2-sd JobId 1037: End of Volume "FILEW-1021" at > > >>>>> addr=2147475654 on device "FileStorage" (/backup). > > >>>>> 06-May 12:49 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1022" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:49 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1022" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:50 backup2-sd JobId 1037: End of Volume "FILEW-1022" at > > >>>>> addr=2147475671 on device "FileStorage" (/backup). > > >>>>> 06-May 12:50 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1023" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:50 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1023" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:50 backup2-sd JobId 1037: End of Volume "FILEW-1023" at > > >>>>> addr=2147475674 on device "FileStorage" (/backup). > > >>>>> 06-May 12:50 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1024" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:50 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1024" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:51 backup2-sd JobId 1037: End of Volume "FILEW-1024" at > > >>>>> addr=2147475677 on device "FileStorage" (/backup). > > >>>>> 06-May 12:51 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1025" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:51 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1025" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:51 backup2-sd JobId 1037: End of Volume "FILEW-1025" at > > >>>>> addr=2147475654 on device "FileStorage" (/backup). > > >>>>> 06-May 12:51 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1026" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:51 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1026" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:52 backup2-sd JobId 1037: End of Volume "FILEW-1026" at > > >>>>> addr=2147475694 on device "FileStorage" (/backup). > > >>>>> 06-May 12:52 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1027" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:52 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1027" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:53 backup2-sd JobId 1037: End of Volume "FILEW-1027" at > > >>>>> addr=2147475665 on device "FileStorage" (/backup). > > >>>>> 06-May 12:53 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1028" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:53 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1028" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:53 backup2-sd JobId 1037: End of Volume "FILEW-1028" at > > >>>>> addr=2147475650 on device "FileStorage" (/backup). > > >>>>> 06-May 12:53 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1029" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:53 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1029" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:54 backup2-sd JobId 1037: End of Volume "FILEW-1029" at > > >>>>> addr=2147475649 on device "FileStorage" (/backup). > > >>>>> 06-May 12:54 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1030" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:54 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1030" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:54 backup2-sd JobId 1037: End of Volume "FILEW-1030" at > > >>>>> addr=2147475651 on device "FileStorage" (/backup). > > >>>>> 06-May 12:54 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1031" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:54 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1031" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:55 backup2-sd JobId 1037: End of Volume "FILEW-1031" at > > >>>>> addr=2147475636 on device "FileStorage" (/backup). > > >>>>> 06-May 12:55 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1032" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:55 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1032" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:55 backup2-sd JobId 1037: End of Volume "FILEW-1032" at > > >>>>> addr=2147475667 on device "FileStorage" (/backup). > > >>>>> 06-May 12:55 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1033" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:55 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1033" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:55 backup2-sd JobId 1037: End of Volume "FILEW-1033" at > > >>>>> addr=2147475633 on device "FileStorage" (/backup). > > >>>>> 06-May 12:55 backup2-sd JobId 1037: Ready to read from volume > > > >>>> "FILEW-1034" > > >>>>> on File device "FileStorage" (/backup). > > >>>>> 06-May 12:55 backup2-sd JobId 1037: Forward spacing Volume > > "FILEW-1034" > > > >>>> to > > >>>>> addr=238 > > >>>>> 06-May 12:56 backup2-sd JobId 1037: End of Volume "FILEW-1034" at > > >>>>> addr=895179674 on device "FileStorage" (/backup). > > >>>>> 06-May 12:56 backup2-sd JobId 1037: Elapsed time=00:54:40, Transfer > > >>>>> rate=18.42 M Bytes/second > > >>>>> 06-May 12:56 backup2-dir JobId 1037: Error: Bacula backup2-dir 9.4.1 > > >>>>> (20Dec18): > > > >>>>> > > > >>>>> > > > >>>>> > > > >>>>> > > >>>>> On Tue, May 7, 2019 at 6:51 PM Martin Simmons <mar...@lispworks.com> > > > >>>> wrote: > > > >>>>>> Maybe there is an error message in the text you snipped? > > > >>>>>> > > > >>>>>> __Martin > > > >>>>>> > > > >>>>>> > > > >>>>>>>>>>> On Mon, 6 May 2019 23:09:46 +0200, Andras Horvai said: > > > >>>>>>> Dear List, > > > >>>>>>> > > > >>>>>>> does anyone have any clue why I got director error after a tape > > > >>>> change: > > > >>>>>> (I > > > >>>>>>> am using copy job to copy full backups (from file storage) to > > tape. > > > >>>>>>> > > > >>>>>>> Tape change message: > > > >>>>>>> > > > >>>>>>> Subject: Bacula: Intervention needed for > > > >>>> srv1-job.2019-05-06_09.00.01_21 > > > >>>>>>> 06-May 12:08 backup2-sd JobId 1038: Please mount append Volume > > > >>>>>> "WORMW-1182" > > > >>>>>>> or label a new one for: > > > >>>>>>> Job: srv1-job.2019-05-06_09.00.01_21 > > > >>>>>>> Storage: "LTO-6" (/dev/nst0) > > > >>>>>>> Pool: TapeArchive > > > >>>>>>> Media type: LTO-6 > > > >>>>>>> > > > >>>>>>> > > > >>>>>>> Then comes this: > > > >>>>>>> > > > >>>>>>> > > > >>>>>>> 06-May 09:00 backup2-dir JobId 1037: Copying using JobId=1016 > > > >>>>>>> Job=srv1-job.2019-05-04_02.00.00_59 > > > >>>>>>> 06-May 12:01 backup2-dir JobId 1037: Start Copying JobId 1037, > > > >>>>>>> Job=ArchiveJob.2019-05-06_09.00.01_20 > > > >>>>>>> 06-May 12:01 backup2-dir JobId 1037: Using Device "FileStorage" > > to > > > >>>> read. > > > >>>>>>> ...snip... > > > >>>>>>> > > > >>>>>>> > > > >>>>>>> 06-May 12:56 backup2-sd JobId 1037: End of Volume "FILEW-1034" at > > > >>>>>>> addr=895179674 on device "FileStorage" (/backup). > > > >>>>>>> 06-May 12:56 backup2-sd JobId 1037: Elapsed time=00:54:40, > > Transfer > > > >>>>>>> rate=18.42 M Bytes/second > > > >>>>>>> 06-May 12:56 backup2-dir JobId 1037: Error: Bacula backup2-dir > > 9.4.1 > > > >>>>>>> (20Dec18): > > > >>>>>>> Build OS: x86_64-pc-linux-gnu ubuntu 18.04 > > > >>>>>>> Prev Backup JobId: 1016 > > > >>>>>>> Prev Backup Job: srv1-job.2019-05-04_02.00.00_59 > > > >>>>>>> New Backup JobId: 1038 > > > >>>>>>> Current JobId: 1037 > > > >>>>>>> Current Job: ArchiveJob.2019-05-06_09.00.01_20 > > > >>>>>>> Backup Level: Full > > > >>>>>>> Client: Archiver > > > >>>>>>> FileSet: "None" 2019-02-02 23:14:56 > > > >>>>>>> Read Pool: "ServersWeeklyFullFile" (From Command > > > >>>> input) > > > >>>>>>> Read Storage: "File" (From Pool resource) > > > >>>>>>> Write Pool: "TapeArchive" (From Command input) > > > >>>>>>> Write Storage: "LTO-6" (From Command input) > > > >>>>>>> Catalog: "MyCatalog" (From Client resource) > > > >>>>>>> Start time: 06-May-2019 12:01:27 > > > >>>>>>> End time: 06-May-2019 12:56:13 > > > >>>>>>> Elapsed time: 54 mins 46 secs > > > >>>>>>> Priority: 13 > > > >>>>>>> SD Files Written: 104,642 > > > >>>>>>> SD Bytes Written: 60,444,227,085 (60.44 GB) > > > >>>>>>> Rate: 18394.5 KB/s > > > >>>>>>> Volume name(s): WORMW-1181|WORMW-1182 > > > >>>>>>> Volume Session Id: 728 > > > >>>>>>> Volume Session Time: 1551107460 > > > >>>>>>> Last Volume Bytes: 34,658,297,856 (34.65 GB) > > > >>>>>>> SD Errors: 0 > > > >>>>>>> SD termination status: OK > > > >>>>>>> Termination: *** Copying Error *** > > > >>>>>>> > > > >>>>>>> > > > >>>>>>> Thanks for clarification! > > > >>>>>>> > > > >>>>>>> Andras > > > >>>>>>> > > > > > > > > _______________________________________________ > > > > Bacula-users mailing list > > > > Bacula-users@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > > > > > > > > > > _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
