Hi Sebastian Before you test you tape drive with Btape I would suggest to test your drive first with the vendor tape tools, if your tape drive is HP you can find it here
https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1009019479&swItemId=MTX_fa6e6e6ca60445f1b08decf3f5&swEnvOid=4184 Best Sebastian Suchanek <bac...@suchanek.de> escreveu no dia domingo, 7/04/2019 à(s) 13:39: > Hi all! > > Currently, I'm running a Bacula installation that writes backups to a > LTO4 drive. This is all running perfectly fine. > > Recently, I bought a second-hand LTO5 drive to beef up my storage > capacity a bit. But when I wanted to test the "new" drive, I came across > a somewhat strange problem: When I run btape with the "test" command, > everything seems to work fine. But when I try to run the "fill" command, > btape seems to succeed to write the volume name, but crahes immediately > when it try write "payload" data with a segmentation faul 11. > I'll attach the btraceback data below, but that's all greek to me. > Any idea what is going wrong here? > > > Best regards > > Sebastian > > --------- > > /root/btape: No such file or directory. > [New LWP 24284] > [Thread debugging using libthread_db enabled] > Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". > 0x00007fc1785b0b5a in __waitpid (pid=24397, stat_loc=0x7ffd9aef8b6c, > options=0) at ../sysdeps/unix/sysv/linux/waitpid.c:29 > 29 ../sysdeps/unix/sysv/linux/waitpid.c: No such file or directory. > $1 = 1093482288 > $2 = 1885434978 > $3 = 470585720 > $4 = 470585784 > $5 = 0 > $6 = 0 > $7 = 2021694149 > $8 = 2021694118 > $9 = 2021694111 > $10 = 2021694145 > $11 = 1701276020 > $12 = 2021694138 > Environment variable "TestName" not defined. > #0 0x00007fc1785b0b5a in __waitpid (pid=24397, stat_loc=0x7ffd9aef8b6c, > options=0) at ../sysdeps/unix/sysv/linux/waitpid.c:29 > #1 0x00007fc1787f4f7e in signal_handler () from > /usr/lib/bacula/libbac-7.4.4.so > #2 <signal handler called> > #3 0x000055f81bdc7456 in ?? () > #4 0x000055f81bdbf759 in ?? () > #5 0x00007fc1770b12e1 in __libc_start_main (main=0x55f81bdbf1f0, > argc=4, argv=0x7ffd9aef9e88, init=<optimized out>, fini=<optimized out>, > rtld_fini=<optimized out>, stack_end=0x7ffd9aef9e78) at > ../csu/libc-start.c:291 > #6 0x000055f81bdbfa3a in ?? () > > Thread 2 (Thread 0x7fc17684e700 (LWP 24284)): > #0 pthread_cond_timedwait@@GLIBC_2.3.2 () at > ../sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:225 > #1 0x00007fc1787ff361 in watchdog_thread () from > /usr/lib/bacula/libbac-7.4.4.so > #2 0x00007fc1785a74a4 in start_thread (arg=0x7fc17684e700) at > pthread_create.c:456 > #3 0x00007fc177179d0f in clone () at > ../sysdeps/unix/sysv/linux/x86_64/clone.S:97 > > Thread 1 (Thread 0x7fc178e37040 (LWP 24282)): > #0 0x00007fc1785b0b5a in __waitpid (pid=24397, stat_loc=0x7ffd9aef8b6c, > options=0) at ../sysdeps/unix/sysv/linux/waitpid.c:29 > #1 0x00007fc1787f4f7e in signal_handler () from > /usr/lib/bacula/libbac-7.4.4.so > #2 <signal handler called> > #3 0x000055f81bdc7456 in ?? () > #4 0x000055f81bdbf759 in ?? () > #5 0x00007fc1770b12e1 in __libc_start_main (main=0x55f81bdbf1f0, > argc=4, argv=0x7ffd9aef9e88, init=<optimized out>, fini=<optimized out>, > rtld_fini=<optimized out>, stack_end=0x7ffd9aef9e78) at > ../csu/libc-start.c:291 > #6 0x000055f81bdbfa3a in ?? () > #0 0x00007fc1785b0b5a in __waitpid (pid=24397, stat_loc=0x7ffd9aef8b6c, > options=0) at ../sysdeps/unix/sysv/linux/waitpid.c:29 > 29 in ../sysdeps/unix/sysv/linux/waitpid.c > resultvar = 18446744073709551104 > sc_cancel_oldtype = 0 > #1 0x00007fc1787f4f7e in signal_handler () from > /usr/lib/bacula/libbac-7.4.4.so > No symbol table info available. > #2 <signal handler called> > No locals. > #3 0x000055f81bdc7456 in ?? () > No symbol table info available. > #4 0x000055f81bdbf759 in ?? () > No symbol table info available. > #5 0x00007fc1770b12e1 in __libc_start_main (main=0x55f81bdbf1f0, > argc=4, argv=0x7ffd9aef9e88, init=<optimized out>, fini=<optimized out>, > rtld_fini=<optimized out>, stack_end=0x7ffd9aef9e78) at > ../csu/libc-start.c:291 > 291 ../csu/libc-start.c: No such file or directory. > result = <optimized out> > unwind_buf = {cancel_jmp_buf = {{jmp_buf = {0, -8885532658628884604, > 94524107651600, 140727202848384, 0, 0, -3406061076198258812, > -3403904697575602300}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, > 0x7ffd9aef9eb0, 0x7fc178e4d170}, data = {prev = 0x0, cleanup = 0x0, > canceltype = -1695572304}}} > not_first_call = <optimized out> > #6 0x000055f81bdbfa3a in ?? () > No symbol table info available. > #0 0x0000000000000000 in ?? () > No symbol table info available. > > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > -- -- Cumprimentos, Pedro Oliveira Rua Antonio Botto | Nº 23 | 1º A | 2950-565 Quinta do Anjo tel +351 218 440 100 | mobile +351 916 111 464 website <http://www.pedroliveira.pt/> | <http://www.facebook.com/oliveiraped> <http://www.linkedin.com/in/oliveiraped> *Aviso de Confidencialidade:* Esta mensagem é exclusivamente destinada ao seu destinatário, podendo conter informação CONFIDENCIAL, cuja divulgação está expressamente vedada nos termos da lei. Caso tenha recepcionado indevidamente esta mensagem, solicitamos-lhe que nos comunique esse mesmo facto por esta via ou para o telefone +351 916111464 devendo apagar o seu conteúdo de imediato. This message is intended exclusively for its addressee. It may contain CONFIDENTIAL information protected by law. If this message has been received by error, please notify us via e-mail or by telephone +351916111464 and delete it immediately.
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
