I have made changes as suggested and things seem MUCH better, but not
functional
I no longer get error messages when typing label from bconsole
As mentioned earlier, the command
./mtx-changer /dev/sg3 load 1 /dev/st0 0
actually put the desired tape into the drive, however
./mtx-changer /dev/sg3 unload 1 /dev/st0 0
returns the following error message
̣root@LTOMag scripts]# ./mtx-changer /dev/sg3 unload 1 /dev/st0 0
Unloading drive 0 into Storage Element 1...mtx: Request Sense: Long
Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Illegal Request
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 53
mtx: Request Sense: Additional Sense Qualifier = 01
mtx: Request Sense: Field in Error = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=yes
mtx: Request Sense: Field Pointer = 00 00
MOVE MEDIUM from Element Address 256 to 4096 Failed
and release from bcolsole returns
[root@LTOMag scripts]# bconsole
Connecting to Director ltomag.asaambiental.mx:9101
1000 OK: 102 ltomag-dir Version: 7.4.3 (18 June 2016)
Enter a period to cancel a command.
*release
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
Automatically selected Storage: Autochanger
Enter autochanger slot: 1
3307 Issuing autochanger "unload slot 1, drive 0" command for vol unknown.
3995 Bad autochanger "unload slot 1, drive 0": ERR=Child exited with code 1
Results=Unloading drive 0 into Storage Element 1...mtx: Request Sense:
Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Illegal Request
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 53
mtx: Request Sense: Additional Sense Qualifier = 01
mtx: Request Sense: Field in Error = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=yes
mtx: Request Sense: Field Pointer = 00 00
MOVE MEDIUM from Element Address 256 to 4096 Failed
3921 Device ""ltomag-drive" (/dev/nst0)" already released.
which seems to indicate that the drive is empty, which is FALSE
and
[root@LTOMag scripts]# ./mtx-changer /dev/sg3 load 1 /dev/st0 0
Drive 0 Full (Storage Element 1 loaded)
I read somewhere that a param in the
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
had to be modified or deleted for the Quantum scalar I3, but can't
recall where I saw that, maybe in backup central
I split my bacula-dir into components so here are the relevant ones
[root@LTOMag conf.d]# cat ../bacula-dir.conf
Director {
Name = ltomag-dir
DIRport = 9101
QueryFile = "/etc/bacula/scripts/query.sql"
WorkingDirectory = "/var/lib/bacula"
PidDirectory = "/var/run/bacula-dir"
Maximum Concurrent Jobs = 10
Password = "xxxxxxxxxxxx"
Messages = Daemon
DirAddress = ltomag.asaambiental.mx
}
Catalog {
Name = MyCatalog
dbname = "bacula"; dbuser = "bacula"; dbpassword = "MySQLBaculaPW"
}
Messages {
Name = Standard
mailcommand = "/usr/sbin/bsmtp -h ltomag.asaambiental.mx -f
\"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r"
operatorcommand = "/usr/sbin/bsmtp -h ltomag.asaambiental.mx -f
\"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r"
mail = gayta...@asaambiental.mx = all, !skipped
operator = gayta...@asaambiental.mx = mount
console = all, !skipped, !saved
append = "/var/lib/bacula/log" = all, !skipped
catalog = all
}
Messages {
Name = Daemon
mailcommand = "/usr/sbin/bsmtp -h ltomag.asaambiental.mx -f
\"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r"
mail = gayta...@asaambiental.mx = all, !skipped
console = all, !skipped, !saved
append = "/var/lib/bacula/log" = all, !skipped
}
Console {
Name = ltomag-mon
Password = "xxxxxxxxxxx"
CommandACL = status, .status
}
# Include conf files in /etc/bacula/conf.d
@|"sh -c 'for f in /etc/bacula/conf.d/*.conf; do echo @${f}; done'"
and here is conf.d/jobdefs.conf
[root@LTOMag conf.d]# cat jobdefs.conf
JobDefs {
Name = "DefaultJob"
Type = Backup
Level = Full
Client = hermes-fd
FileSet = "HERMESActiveSet"
Schedule = "DailyCycle"
Storage = Autochanger
Messages = Standard
Priority = 10
Pool = Default
Write Bootstrap = "/var/lib/bacula/%c.bsr"
}
JobDefs {
Name = "BacchusDefaultJob"
Type = Backup
Level = Full
Client = bacchus-fd
FileSet = "BACCHUSActiveSet"
Schedule = "BacchusActiveCycle"
Storage = Autochanger
Messages = Standard
Priority = 10
Pool = Default
Write Bootstrap = "/var/lib/bacula/%c.bsr"
}
JobDefs {
Name = "ConfigsHistJob"
Type = Backup
Level = Full
Client = hermes-fd
FileSet = "HERMESHistSet"
Schedule = "ConfigsHistCycle"
Storage = Autochanger
Messages = Standard
Priority = 10
Pool = Default
Write Bootstrap = "/var/lib/bacula/%c.bsr"
}
and here is conf.d/storage.conf
[root@LTOMag conf.d]# cat storage.conf
Storage {
Name = Autochanger
Address = ltomag.asaambiental.mx
SDPort = 9103
Password = "xxxxxxxxxxxx"
Device = ltomag-drive
Media Type = LTO-7
Autochanger = yes
}
The other included mods are
-rw-r----- 1 root root 662 Jan 7 12:33 clients.conf
-rw-r----- 1 root root 27567 Jan 7 12:33 filesets.conf
-rw-r----- 1 root root 1505 Jan 10 06:30 jobs.conf
-rw-r----- 1 root root 2241 Jan 7 12:33 pools.conf
-rw-r----- 1 root root 473 Jan 7 12:33 schedules.conf
and finally here is my bacula-sd.conf
[root@LTOMag conf.d]# cat ../bacula-sd.conf
Storage {
Name = ltomag-sd
SDPort = 9103
WorkingDirectory = "/var/lib/bacula"
Pid Directory = "/var/run/bacula-sd"
Maximum Concurrent Jobs = 20
SDAddress = ltomag.asaambiental.mx
}
Director {
Name = ltomag-dir
Password = "ltomagsdpass"
}
Director {
Name = ltomag-mon
Password = "ltomagmonpass"
Monitor = yes
}
Autochanger {
Name = Autochanger
Device = ltomag-drive
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg3
}
Device {
Name = ltomag-drive
Device Type = Tape
Media Type = LTO-7
Archive Device = /dev/nst0
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Maximum File Size = 100GB
AutoChanger = yes
Alert Command = "sh -c 'smartctl -H -l error %c'"
Spool Directory = /var/spool/bacula
LabelMedia = yes
}
Messages {
Name = Standard
director = ltomag-dir = all
}
Thanks
Richard
On 1/9/19 10:34 PM, Adam Nielsen wrote:
Automatically selected Storage: LTO-6
This seems to suggest that the Director is configured to use a device
called "LTO-6". Care to post the bacula-dir.conf? I know you said
there's no mention of "LTO-6" here, but perhaps you need to mention the
storage device specifically? With your config names, my bacula-dir.conf
would say this:
JobDefs {
Name = "DefaultJob"
Type = Backup
Storage = Autochanger
...
This would tell Bacula to try to write to "Autochanger" rather than
"LTO-6".
Connecting to Storage daemon LTO-6 at ltomag.asaambiental.mx:9103 ...
3999 Device "LTO-6" not found or could not be opened.
This would make sense because your Storage device is called "LTO-8" so
it can't find one called "LTO-6".
In my opinion I'd rename your device to use something other than
"LTO-8" otherwise you can't tell whether it's referring to the device
or the media format:
Autochanger {
Device = ltomag-drive
...
}
Device {
Name = ltomag-drive
Drive Index = 0
Media Type = LTO-7
...
Here, you will know "ltomag-drive" means the Device section, while
"LTO-*" means a media type.
How can I get bacula to acknowledge the LTO-8 drive with the LTO-7
tapes???
This should all be automatic. In my own setup I'm using an LTO-5
autochanger with LTO-4 tapes, and it works fine. I don't think Bacula
actually checks the LTO media, I suspect it just uses the "Media Type"
you've specified in the "Device" config. In my above example I wrote
"LTO-7", but think this just marks any media that passes through the
drive as LTO-7, regardless of what it actually is.
I don't think this will cause any problems unless you actually have a
single Bacula setup that uses multiple tape types at the same time,
and it needs to look at the Media Type in order to decide which drive
to load the tape into.
Cheers,
Adam.
--
LinuxCabal Asociación Civil
Ing. Richard Couture
Novell CNE, ECNE, MCNE
HP/Compaq ASE
Tel.: (+52) (333) 145-2638
Cel.: (+52) (044) 333 377-7505
Web: http://www.LinuxCabal.org
E-Mail: r...@linuxcabal.org
Hosted en la nube Cloud Sigma - www.CloudSigma.com
AVISO DE CONFIDENCIALIDAD: Este correo electrónico, incluyendo en su
caso, los archivos adjuntos al mismo, pueden contener información de
carácter confidencial y/o privilegiada, y se envían a la atención única
y exclusivamente de la persona y/o entidad a quien va dirigido. La
copia, revisión, uso, revelación y/o distribución de dicha información
confidencial sin la autorización por escrito de LinuxCabal está
prohibida. Si usted no es el destinatario a quien se dirige el presente
correo, favor de contactar al remitente respondiendo al presente correo
y eliminar el correo original incluyendo sus archivos, así como
cualesquiera copia del mismo. Mediante la recepción del presente correo
usted reconoce y acepta que en caso de incumplimiento de su parte y/o de
sus representantes a los términos antes mencionados, LinuxCabal tendrá
derecho a los daños y perjuicios que esto le cause.
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
