Hello Martin,
I think this is indeed the root of the problem.
The problem is that the Director has modified the value of VolCatStatus
while the SD
knows that it could have changed this value. It is a sort of "race"
condition where
the variable can change on both (SD and DIR) sides.
I'll need to think about it for awhile to find the best way to fix it.
Thanks for catching this.
Best regards,
Kern
On 10/02/2018 04:57 PM, Martin Simmons wrote:
My guess is that the SD is repeated sending Update_media with the status set
to Append, even though the Director has set it to Full in has_volume_expired.
Maybe line 511 of src/stored/askdir.c is copying in the wrong direction?
bstrncpy(dcr->VolCatInfo.VolCatStatus, dev->VolCatInfo.VolCatStatus,
sizeof(vol.VolCatStatus));
That would set the status back to Append in the SD, ignoring the value
obtained from the Director by do_get_volume_info.
The code in 7.4.4 copied the status from dcr (obtained from the Director) to
dev. I don't know why the other assignments into dcr are needed.
__Martin
On Tue, 2 Oct 2018 11:35:57 +0200, Kern Sibbald said:
Hello,
Hmm. 107 messages and and the volumes are 107... long. Strange
coincidence. Could you provide a copy of your bacula-sd.conf as well
as the full output including other jobs running at the time of the 107
messages. As far as I know, there is nothing that would trigger a
message for each gigabyte, unless it is one of your parameters in the
bacula-sd.conf file -- e.g. are you writing an EOF on your tape
volumes each 1 GB?
Best regards,
Kern
On 10/01/2018 10:32 PM, Stieneke, Dan wrote:
64-bit Ubuntu 18.04LTS using distro-packaged Bacula, v9.0.6.
Backing up to 100G disk volumes, max job=1, I get 107 lines in the
output for each volume:
============================================================================================================
01-Oct 12:47 <SERVERNAME>-dir JobId 23: Max Volume jobs=1 exceeded.
Marking Volume "<VOLNAME>-0056" as Used.
============================================================================================================
The 100G disk volumes are **107**,374,158,233 bytes long, so every
~1GB the message appears. I’d much rather have only one warning than 107.
Is there a setting I’m missing somewhere?
Thanks,
Dan Stieneke
IT Specialist
USDA - ARS - NWISRL
3793 N 3600 E
Kimberly, ID 83341
208/423-6519
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
