Hello Miguel, On Sun, 30 Sep 2018 at 09:54, Miguel Gutiérrez Páez <mgutier...@gmail.com> wrote: > > Hi Marcin, > > My fault, absolutely my fault; I feel like an idiot! I went directly through > the baculum wizard, thinking that this same wizard would configure the api. > In fact (well, now I cannot swear it) I'm pretty sure that the first or > second time it worked, but I had to repat the process due to a password > mismatch and I never got to work again.
No problem. Glad to hear that the Baculum started working on your side. > I've repeated the whole process, including of course configuring the api. I > still have some problems with selinux (I like to enable it, but sometimes > it's a nightmare) but that's another history. Now I can see the web interface > and looks pretty well. In the past the Baculum was providing the package with SELinux policies but later this package was dropped. I will check what should be done to resume it. > I will contact you if problems appear again. OK. Thank you. > Sorry for the caused inconveniences. Thanks a lot for your kind support and > help. You are welcome. Best regards. Marcin Haba (gani) > M > > El vie., 28 sept. 2018 a las 22:16, Marcin Haba (<ganius...@gmail.com>) > escribió: >> >> Hello Miguel, >> >> Thanks for your detailed response. >> >> If you don't have api.conf in >> /usr/share/baculum/htdocs/protected/API/Config/ it means that you >> don't have Baculum API configured. Did you go through the Baculum API >> wizard on http://localhost:9096 ? Is the Baculum API working on your >> side? I mean if you can: >> >> 1) log in to Baculum API on http://localhost:9096 >> 2) send API requests to the API by Baculum API panel? >> >> Thanks in advance for response. >> >> Best regards. >> Marcin Haba (gani) >> On Fri, 28 Sep 2018 at 08:55, Miguel Gutiérrez Páez >> <mgutier...@gmail.com> wrote: >> > >> > Hi Marcin, >> > >> > Thanks for your kind support. >> > >> > I'm using HTTP auth. >> > The file api.conf does not exist in the mentioned directory nor in the >> > whole system. The only file in that dir is the baculum.users file (that, >> > by the way, contains the default user/pass admin/admin). The dir logs >> > /usr/share/baculum/htdocs/protected/API/Logs/ is empty and the file >> > /usr/share/baculum/htdocs/protected/Web/Logs/baculum-web.log throws the >> > following messages when I press test button: >> > >> > EXECUTE URI ==> http://localhost:9096/api/v1/catalog <== >> > >> > , File=/usr/share/baculum/htdocs/protected/Web/Class/BaculumAPIClient.php, >> > Line=178 (line 67, >> > /usr/share/baculum/htdocs/protected/Common/Class/Logging.php) >> > Sep 28 08:53:54 [Debug] [Application] Command=preParseOutput, >> > Output={"output":"Problem with authorization to Baculum API.","error":6}, >> > File=/usr/share/baculum/htdocs/protected/Web/Class/BaculumAPIClient.php, >> > Line=455 (line 67, >> > /usr/share/baculum/htdocs/protected/Common/Class/Logging.php) >> > Sep 28 08:53:54 [Debug] [Application] Command=preParseOutput, >> > Output=stdClass Object >> > ( >> > [output] => Problem with authorization to Baculum API. >> > [error] => 6 >> > ) >> > , File=/usr/share/baculum/htdocs/protected/Web/Class/BaculumAPIClient.php, >> > Line=478 (line 67, >> > /usr/share/baculum/htdocs/protected/Common/Class/Logging.php) >> > Sep 28 08:53:54 [Debug] [Application] Command=getURIResource, Output= >> > >> > repeated three times. >> > >> > Thanks! >> > >> > El jue., 27 sept. 2018 a las 18:45, Marcin Haba (<ganius...@gmail.com>) >> > escribió: >> >> >> >> Hello Miguel, >> >> >> >> Thank you for your feedback. >> >> >> >> The undefined index problem is a bug that is will be fixed in next >> >> Baculum version. Thanks for reporting it. >> >> >> >> To the problem with connecting Baculum Web to Baculum API, could you >> >> tell me if you are using OAuth2 or HTTP Basic option? >> >> >> >> I propose to enable debug on the API side by editing: >> >> >> >> /usr/share/baculum/htdocs/protected/API/Config/api.conf >> >> >> >> and switch in [api] section "debug" option to "1" >> >> >> >> Then you can see the debug files in: >> >> >> >> /usr/share/baculum/htdocs/protected/API/Logs/ >> >> >> >> For the Web wizard the debug should be enabled by default till time >> >> when you finish the wizard. Web logs you can find in path: >> >> >> >> /usr/share/baculum/htdocs/protected/Web/Logs/ >> >> >> >> Are you seeing any error in log files when you click connection test >> >> button? >> >> >> >> Thanks in advance for response. >> >> >> >> Best regards. >> >> Marcin Haba (gani) >> >> On Thu, 27 Sep 2018 at 16:31, Miguel Gutiérrez Páez >> >> <mgutier...@gmail.com> wrote: >> >> > >> >> > Hi Marcin, >> >> > >> >> > Thanks a lot for your effort. I managed to install baculum, however, I >> >> > have many problems to get it work. Just the first time I run the web >> >> > wizard, I got a Prado Exception: >> >> > >> >> > Prado\Exceptions\TPhpErrorException >> >> > >> >> > Description >> >> > >> >> > [Notice] Undefined index: language (@line 41 in file >> >> > /usr/share/baculum/htdocs/protected/Web/Pages/WebConfigWizard.php). >> >> > >> >> > Source File >> >> > >> >> > /usr/share/baculum/htdocs/protected/Web/Pages/WebConfigWizard.php (41) >> >> > >> >> > >> >> > The only and ugly solution I found is to edit the metioned file and >> >> > comment out line 41. That worked. >> >> > After that, I cannot setup the API credentials. Once I managed to get >> >> > it work, but I had the repeat the steps and I cannot get it work again. >> >> > When I press Test, I get always "Problem with authorization to Baculum >> >> > API." (three times). I've tried to debug it, including tcpdumps to port >> >> > 9096. I can see traffic back and forth, and even the unauthorized >> >> > message. I've uninstalled and wiped all the packages and their config, >> >> > to use again default passwords, but no luck. >> >> > >> >> > Do you have any idea? >> >> > >> >> > Many thanks! >> >> > >> >> > >> >> > El jue., 27 sept. 2018 a las 14:59, Marcin Haba (<ganius...@gmail.com>) >> >> > escribió: >> >> >> >> >> >> Hello Miguel, >> >> >> >> >> >> I let know that the Baculum packages 9.2.1 have been rebuilt and they >> >> >> no longer require bacula-console package. They are available in the >> >> >> Baculum repositories. >> >> >> >> >> >> Best regards. >> >> >> Marcin Haba (gani) >> >> >> On Sat, 22 Sep 2018 at 22:33, Miguel Gutiérrez Páez >> >> >> <mgutier...@gmail.com> wrote: >> >> >> > >> >> >> > Hi Marcin, >> >> >> > >> >> >> > Thanks for your response. Sorry I didn't see that post. >> >> >> > >> >> >> > I will wait for the rebuild. Baculum seems to be a great web >> >> >> > interface and I'm wishing to try it out. >> >> >> > >> >> >> > Regards >> >> >> > >> >> >> > El sáb., 22 sept. 2018 17:50, Marcin Haba <ganius...@gmail.com> >> >> >> > escribió: >> >> >> >> >> >> >> >> Hello Miguel, >> >> >> >> >> >> >> >> The Baculum packages are not compatible with the Bacula packages >> >> >> >> from >> >> >> >> bacula.org. The Baculum requires bacula-console that doesn't exist >> >> >> >> in >> >> >> >> packages from bacula.org. >> >> >> >> >> >> >> >> I recall other request about this inconsistency: >> >> >> >> >> >> >> >> https://sourceforge.net/p/bacula/mailman/message/36355386/ >> >> >> >> >> >> >> >> I will remove the bacula-console dependency and rebuild Baculum >> >> >> >> packages soon. >> >> >> >> >> >> >> >> Best regards. >> >> >> >> Marcin Haba (gani) >> >> >> >> On Fri, 21 Sep 2018 at 22:30, Miguel Gutiérrez Páez >> >> >> >> <mgutier...@gmail.com> wrote: >> >> >> >> > >> >> >> >> > Hi all, >> >> >> >> > >> >> >> >> > Has anybody managed to install baculum (baculum-api) under >> >> >> >> > centos7 with the official repos? I mean, it seems there are some >> >> >> >> > libs conflicts when installing baculum. It complaints about some >> >> >> >> > packages of bacula's community repos (it wants packages from the >> >> >> >> > centos base repo) >> >> >> >> > >> >> >> >> > >> >> >> >> > yum install baculum-api >> >> >> >> > Loaded plugins: fastestmirror >> >> >> >> > Loading mirror speeds from cached hostfile >> >> >> >> > * base: centos.uvigo.es >> >> >> >> > * epel: mirror.uv.es >> >> >> >> > * extras: centos.uvigo.es >> >> >> >> > * updates: centos.uvigo.es >> >> >> >> > * webtatic: uk.repo.webtatic.com >> >> >> >> > Resolving Dependencies >> >> >> >> > --> Running transaction check >> >> >> >> > ---> Package baculum-api.noarch 0:9.2.1-1.el7 will be installed >> >> >> >> > --> Processing Dependency: bacula-console for package: >> >> >> >> > baculum-api-9.2.1-1.el7.noarch >> >> >> >> > --> Running transaction check >> >> >> >> > ---> Package bacula-console.x86_64 0:5.2.13-23.1.el7 will be >> >> >> >> > installed >> >> >> >> > --> Processing Dependency: bacula-libs(x86-64) = 5.2.13-23.1.el7 >> >> >> >> > for package: bacula-console-5.2.13-23.1.el7.x86_64 >> >> >> >> > --> Processing Dependency: libbaccfg-5.2.13.so()(64bit) for >> >> >> >> > package: bacula-console-5.2.13-23.1.el7.x86_64 >> >> >> >> > --> Processing Dependency: libbac-5.2.13.so()(64bit) for package: >> >> >> >> > bacula-console-5.2.13-23.1.el7.x86_64 >> >> >> >> > --> Finished Dependency Resolution >> >> >> >> > Error: Package: bacula-console-5.2.13-23.1.el7.x86_64 (base) >> >> >> >> > Requires: bacula-libs(x86-64) = 5.2.13-23.1.el7 >> >> >> >> > Installed: bacula-libs-9.2.1-1.el7.x86_64 >> >> >> >> > (@Bacula-Community) >> >> >> >> > bacula-libs(x86-64) = 9.2.1-1.el7 >> >> >> >> > Available: bacula-libs-5.2.13-23.1.el7.x86_64 (base) >> >> >> >> > bacula-libs(x86-64) = 5.2.13-23.1.el7 >> >> >> >> > Error: Package: bacula-console-5.2.13-23.1.el7.x86_64 (base) >> >> >> >> > Requires: libbaccfg-5.2.13.so()(64bit) >> >> >> >> > Available: bacula-libs-5.2.13-23.1.el7.x86_64 (base) >> >> >> >> > libbaccfg-5.2.13.so()(64bit) >> >> >> >> > Installed: bacula-libs-9.2.1-1.el7.x86_64 >> >> >> >> > (@Bacula-Community) >> >> >> >> > ~libbaccfg-9.2.1.so()(64bit) >> >> >> >> > Error: Package: bacula-console-5.2.13-23.1.el7.x86_64 (base) >> >> >> >> > Requires: libbac-5.2.13.so()(64bit) >> >> >> >> > Available: bacula-libs-5.2.13-23.1.el7.x86_64 (base) >> >> >> >> > libbac-5.2.13.so()(64bit) >> >> >> >> > Installed: bacula-libs-9.2.1-1.el7.x86_64 >> >> >> >> > (@Bacula-Community) >> >> >> >> > ~libbac-9.2.1.so()(64bit) >> >> >> >> > You could try using --skip-broken to work around the problem >> >> >> >> > You could try running: rpm -Va --nofiles --nodigest >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> > Thanks! >> >> >> >> > >> >> >> >> > _______________________________________________ >> >> >> >> > Bacula-users mailing list >> >> >> >> > Bacula-users@lists.sourceforge.net >> >> >> >> > https://lists.sourceforge.net/lists/listinfo/bacula-users >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> >> "Greater love hath no man than this, that a man lay down his life >> >> >> >> for >> >> >> >> his friends." Jesus Christ >> >> >> >> >> >> >> >> "Większej miłości nikt nie ma nad tę, jak gdy kto życie swoje >> >> >> >> kładzie >> >> >> >> za przyjaciół swoich." Jezus Chrystus >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> "Greater love hath no man than this, that a man lay down his life for >> >> >> his friends." Jesus Christ >> >> >> >> >> >> "Większej miłości nikt nie ma nad tę, jak gdy kto życie swoje kładzie >> >> >> za przyjaciół swoich." Jezus Chrystus >> >> >> >> >> >> >> >> -- >> >> "Greater love hath no man than this, that a man lay down his life for >> >> his friends." Jesus Christ >> >> >> >> "Większej miłości nikt nie ma nad tę, jak gdy kto życie swoje kładzie >> >> za przyjaciół swoich." Jezus Chrystus >> >> >> >> -- >> "Greater love hath no man than this, that a man lay down his life for >> his friends." Jesus Christ >> >> "Większej miłości nikt nie ma nad tę, jak gdy kto życie swoje kładzie >> za przyjaciół swoich." Jezus Chrystus -- "Greater love hath no man than this, that a man lay down his life for his friends." Jesus Christ "Większej miłości nikt nie ma nad tę, jak gdy kto życie swoje kładzie za przyjaciół swoich." Jezus Chrystus _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
