On 15/05/2018 22:01, Charles Nadeau wrote:
Hello!
I just got a used Dell TL2000 tape library to use with Bacula (9.0.4 for
the director on Ubuntu 16.04, 9.0.6 for the storage director on Ubuntu
18.04).
I tested it with btape and mtx-changer and it passes all tests (strongly
inspired by Dan Langille's
https://dan.langille.org/2016/02/04/dell-tl4000-tape-library-running-btape-and-configuring-baculas-mtx-changer/).
Once defined/integrated in Bacula, I can't label the tapes,
bacula-director crashes.
Here is what the session is at bconsole:
[SNIP]
Could anybody tell me where the problem could be? Could it be about the
versions mismatch? I saw on the list that Dan Langille wrote
(https://sourceforge.net/p/bacula/mailman/message/36187800/):
"bacula-dir = bacula-sd >= bacula-fd" How close should the versions of
-dir and -sd be? In my case they are 0.0.2 apart.
It's =.
Not ~, or ~=, or "just a smidge like".
Dir and SD have to be the same version.
I repeat, DIR AND SD HAVE TO BE THE SAME VERSION.
Got it?
That's what "=" means. (Except when it mean "assignment", which makes
no sense in this context.)
Cheers,
Gary B-)
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
