On Thursday 2017-09-07 09:33:06 Matthias Koch-Schirrmeister wrote: > Am 07.09.2017 um 11:04 schrieb Josip Deanovic: > > On Thursday 2017-09-07 08:50:14 Matthias Koch-Schirrmeister wrote: > >> Am 06.09.2017 um 10:13 schrieb Matthias Koch-Schirrmeister: > >>> Setting both to > >>> > >>> Heartbeat Interval = 600 > >>> > >>> now. > >> > >> First run looks good. I will do more checks. Thank you very much so > >> far, hope that was the solution. The odd thing is, this used to work > >> for over a year without setting the heartbeat directive at all. > >> > >> Matthias > > > > Might be that there are now some network issues that didn't occur > > before. > That's of course a possibility. I'll reactivate a few more jobs and > we'll see then. Basically two jobs used to fail, and these were > long-running jobs (>5 hours). Shorter ones never gave me trouble. > > Matthias
Check the section "Dealing with firewalls" to better understand what might be going on here: http://www.bacula.org/5.2.x-manuals/es/problems/problems/Dealing_with_Firewalls.html This is the old documentation (for 5.2.x) but it still applies in this case. -- Josip Deanovic ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
