On 08/01/17 16:09, Phil Stracchino wrote:
>
> ...Actually, even the fake-autochanger works only to load tapes, not to
> unload.
I have just reverted my configuration. Director, in bacula-dir.conf:
Storage {
Name = babylon5-sd
Address = babylon5.babcom.com
SDPort = 9103
Password = "********************"
Device = LTO-4
Media Type = LTO-4
Maximum Concurrent Jobs = 20
Autochanger = no
}
Storage, in sd.conf:
Device {
Name = LTO-4
Media Type = LTO-4
Archive Device = /dev/nst0
Changer Device = /dev/sg5
AutomaticMount = yes # when device opened, read it
AlwaysOpen = yes
OfflineOnUnmount = yes
RemovableMedia = yes
RandomAccess = no
Maximum File Size = 5GB
Maximum Block Size = 2048000
Spool Directory = /var/tmp/bacula
Maximum Spool Size = 10GB
Maximum Job Spool Size = 5GB
}
I can read from and write to an already-mounted tape.
I cannot unmount a tape except by stopping the sd and using mt.
I cannot mount a tape except by having it loaded when the sd starts.
This drive worked perfectly in 7.4.7 with this exact configuration.
This is a HP StorageWorks 1760 SAS external LTO-4 drive connected to a
LSI Logic SAS2008 PCI-Express Fusion-MPT SAS-2 (Falcon rev. 02)
controller on a PC running Gentoo Linux and Linux kernel 4.11.6.
--
Phil Stracchino
Babylon Communications
ph...@caerllewys.net
p...@co.ordinate.org
Landline: +1.603.293.8485
Mobile: +1.603.998.6958
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
