hello kern,
How can I test to see, for example, if the two ends are connected?
On Thu, Jul 13, 2017 at 4:58 PM, Kern Sibbald <k...@sibbald.com> wrote:
> Hello,
>
> It appears to me that there is nothing on the other end of the pipe --
> i.e. the two ends are not connected.
>
> Best regards,
>
> Kern
>
>
>
> On 07/13/2017 09:49 PM, Elias Pereira wrote:
>
> hello,
>
> I'm trying to perform a restore from a backup made through the bpipe
> plugin, but errors below always occur.
>
> 2017-07-13 16:33:49 vamp-dir JobId 2710: Start Restore Job
> RestoreFilesGenerico.2017-07-13_16.33.47_17
> 2017-07-13 16:33:49 vamp-dir JobId 2710: Using Device "freenasDev" to
> read.
> 2017-07-13 16:33:49 vamp-sd JobId 2710: Ready to read from volume
> "Sparta-fd.Semanal-NAS-7" on file device "freenasDev" (/mnt/nas_storage).
> 2017-07-13 16:33:49 vamp-sd JobId 2710: Forward spacing Volume
> "Sparta-fd.Semanal-NAS-7" to file:block 6:3323753675 <(332)%20375-3675>.
> 2017-07-13 16:33:53 elias.pc-fd JobId 2710: Fatal error: Pipe write error
> 2017-07-13 16:33:53 elias.pc-fd JobId 2710: Error: restore.c:1320 Wrong
> write size error at byte=0 block=0 wanted=65536 wrote=0
> 2017-07-13 16:33:53 elias.pc-fd JobId 2710: Error: bpipe-fd: Error
> closing for file /var/teste.xva: 268435457
> 2017-07-13 16:33:54 vamp-sd JobId 2710: Error: bsock.c:448 Write error
> sending 37 bytes to client:192.168.7.63:9103: ERR=Connection reset by
> peer
>
> 2017-07-13 16:33:54 vamp-sd JobId 2710: Fatal error: read.c:138 Error
> sending header to Client. ERR=Connection reset by peer
>
> 2017-07-13 16:33:54 vamp-sd JobId 2710: Elapsed time=00:00:05, Transfer
> rate=91.80 K Bytes/second
> 2017-07-13 16:33:54 vamp-sd JobId 2710: Error: bsock.c:375 Socket has
> errors=1 on call to client:192.168.7.63:9103
> 2017-07-13 16:33:54 vamp-dir JobId 2710: Error: Bacula vamp-dir 7.4.1
> (02May16):
> Build OS: x86_64-unknown-linux-gnu debian 8.4
> JobId: 2710
> Job: RestoreFilesGenerico.2017-07-13_16.33.47_17
> Restore Client: elias.pc-fd
> Start time: 13-Jul-2017 16:33:49
> End time: 13-Jul-2017 16:33:54
> Files Expected: 1
> Files Restored: 1
> Bytes Restored: 0
> Rate: 0.0 KB/s
> FD Errors: 3
> FD termination status: Error
> SD termination status: Error
> Termination: *** Restore Error ***
> 2017-07-13 16:33:54 vamp-dir JobId 2710: Begin pruning Jobs older than 2
> years .
> 2017-07-13 16:33:54 vamp-dir JobId 2710: No Jobs found to prune.
> 2017-07-13 16:33:54 vamp-dir JobId 2710: Begin pruning Files.
> 2017-07-13 16:33:54 vamp-dir JobId 2710: No Files found to prune.
> 2017-07-13 16:33:54 vamp-dir JobId 2710: End auto prune.
>
> Any idea?
>
> --
> Elias Pereira
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
>
> _______________________________________________
> Bacula-users mailing
> listBacula-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
>
--
Elias Pereira
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
