Hello,
I must be missing something stupid. I am using IBM barcode labels on LTO7
tapes. Bacula labeled my media, but I am unable to start backup job due to
error Fatal error: ansi_label.c:296 ANSI Volume label name "000009L7" longer
than 6 chars.
BConsole Steps:
*label barcodes
*- snip -*
*update slots
Device "ULT3580" has 8 slots.
Catalog record for Volume "000009L7" is up to date.
Catalog record for Volume "000001L7" is up to date.
Catalog record for Volume "000008L7" is up to date.
Catalog record for Volume "000003L7" is up to date.
Catalog record for Volume "000006L7" is up to date.
Catalog record for Volume "000005L7" is up to date.
Catalog record for Volume "CLN002L1" is up to date.
Catalog record for Volume "000007L7" is up to date.
17-Apr 20:16 bacula-dir JobId 18: Start Backup JobId 18,
Job=Backup_TestData.2017-04-17_20.16.03_19
17-Apr 20:16 bacula-dir JobId 18: Using Device "ULT3580" to write.
17-Apr 20:16 bacula-sd JobId 18: 3307 Issuing autochanger "unload slot 3, drive
0" command for vol 000009L7.
17-Apr 20:16 bacula-sd JobId 18: 3304 Issuing autochanger "load slot 1, drive
0" command for vol 000009L7.
17-Apr 20:17 bacula-sd JobId 18: 3305 Autochanger "load slot 1, drive 0",
status is OK for vol 000009L7.
17-Apr 20:17 bacula-sd JobId 18: Error: 17-Apr 20:17 bacula-sd JobId 18: Fatal
error: ansi_label.c:296 ANSI Volume label name "000009L7" longer than 6 chars.
17-Apr 20:17 bacula-fd JobId 18: Fatal error: job.c:2484 Bad response from SD
to Append Data command. Wanted 3000 OK data
, got len=114 msg="3903 Error append data: ansi_label.c:85 Read error on device
/dev/nst0 in ANSI label. ERR=Cannot allocate memory "
17-Apr 20:17 bacula-sd JobId 18: Marking Volume "000009L7" in Error in Catalog.
17-Apr 20:17 bacula-sd JobId 18: Fatal error: Job 18 canceled.
#-- /etc/bacula/bacula-sd.conf
Device {
Name = ULT3580
Description = "IBM ULT3580-HH7"
Media Type = LTO-7
Archive Device = /dev/nst0
Label Type = IBM;
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes;
Changer Device = /dev/sg6
Drive Index = 0
Spool Directory = /backup/bacula/spool
Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
# Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
#-- /etc/bacula/bacula-dir.conf
Pool {
Name = Daily_Tapes
Pool Type = Backup
Cleaning Prefix = "CLN"
Recycle = yes
AutoPrune = yes
Volume Retention = 6 days
Recycle Oldest Volume = yes
Label Type = IBM
}
Thanks!
Jim Richardson
CONFIDENTIALITY: This email (including any attachments) may contain
confidential, proprietary and privileged information, and unauthorized
disclosure or use is prohibited. If you received this email in error, please
notify the sender and delete this email from your system. Thank you.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
