Hi, I have a little problem: I have an autochanger with two devices. In former times, after I issued a "unmount storage=blah drive=0" the sd status for that device was displayed as "BLOCKED by user", which should still be the case, according to the documentation.
Since some months, this seems to work no longer.
The bacula version is 7.0.5 and the device definition is as follows:
Device {
Name = LTO0
Media Type = LTO-3
Device Type = Tape
Archive Device = /dev/nst0
drive index = 0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = no;
RemovableMedia = yes;
RandomAccess = no;
Offline On Unmount = no
Autochanger = yes;
Drive Index = 0;
Alert Command = "sh -c 'tapeinfo -f /dev/sg0 |grep TapeAlert|cat'"
Maximum Network Buffer Size = 655360
Maximum Spool Size = 400g
Spool Directory = /var/bacula/spool
Maximum File Size=15g
Maximum Block Size = 1290240
Maximum Network Buffer Size = 655360
Maximum Changer Wait = 300 s
Maximum Open Wait = 180 s
}
Any idea?
Regards,
Dietz
--
Name the Puppet Master
signature.asc
Description: This is a digitally signed message part.
------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
