Hello Ankush, It is not recommended to set Prefer Mounted Volumes = no. There is a lot of threads in this list explaining this. Try to set it to yes (default if not specified).
Best regards, Ana On Wed, Dec 9, 2015 at 7:50 AM, More, Ankush <ankush.m...@capgemini.com> wrote: > Team, > > > > Sometime 2 drives acquire same tape, though there are free tapes > available in pool. > > Device get BLOCKED and backup stop until tape is not release. > > > > Below option is enable in bacula-dir file. > > Prefer Mounted Volumes = no > > > > Can you suggest solution for this? > > > > == > > > > Device "Drive-3" (/dev/nst3) is mounted with: > > Volume: NY5195L4 > > Pool: Billable > > Media type: LTO-4 > > Slot 1 is loaded in drive 3. > > Total Bytes=168,744,554,496 Blocks=2,615,707 Bytes/block=64,512 > > Positioned at File=169 Block=13,524 > > == > > > > Device "Drive-4" (/dev/nst4) is not open. > > Device is BLOCKED waiting for mount of volume "NY5195L4", > > Pool: Billable > > Media type: LTO-4 > > Drive 4 is not loaded. > > == > > > > Thank you, > > Ankush More > > > This message contains information that may be privileged or confidential > and is the property of the Capgemini Group. It is intended only for the > person to whom it is addressed. If you are not the intended recipient, you > are not authorized to read, print, retain, copy, disseminate, distribute, > or use this message or any part thereof. If you receive this message in > error, please notify the sender immediately and delete all copies of this > message. > > > ------------------------------------------------------------------------------ > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > >
------------------------------------------------------------------------------
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
