Hello Dan,
I was unable to reproduce this. The only situation where I got the error:
24-Aug 01:45 bacula-dir JobId 215534: Created new Volume="DiffAuto-4861",
Pool="DiffFile", MediaType="File" in catalog.
24-Aug 01:45 crey-sd JobId 215534: Warning: mount.c:212 Open of file device
"vDrive-1" (/usr/local/bacula/volumes) Volume "DiffAuto-4861" failed:
ERR=file_dev.c:172 Could not open(/usr/local/bacula/
volumes/DiffAuto-4861,OPEN_READ_WRITE,0640): ERR=No such file or directory
was when there was the file for the volume in the directory but the volume
did not exist in catalog.
Tried to reproduce as bellow:
1) pool with maximum volumes = 5.
2) tried to run a job:
25-Aug 10:46 bacula-dir JobId 24: Start Backup JobId 24,
Job=BackupClient1.2015-08-25_10.46.14_11
25-Aug 10:46 bacula-dir JobId 24: Using Device "FileChgr1-Dev1" to write.
25-Aug 10:46 bacula-sd JobId 24: Job BackupClient1.2015-08-25_10.46.14_11
is waiting. Cannot find any appendable volumes.
Please use the "label" command to create a new Volume for:
Storage: "FileChgr1-Dev1" (/opt/bacula/disk)
Pool: File
Media type: File1
3) increased the maximum volumes to 50 (updated conf, reload, list pool
bellow).
*list pool=File
+--------+------+---------+---------+----------+-------------+
| PoolId | Name | NumVols | MaxVols | PoolType | LabelFormat |
+--------+------+---------+---------+----------+-------------+
| 2 | File | 5 | 50 | Backup | Vol- |
+--------+------+---------+---------+----------+-------------+
4) then tried a mount and everything goes fine (i didn't try a label before
mount command):
*mount
The defined Storage resources are:
1: File1
2: File2
Select Storage resource (1-2): 1
3001 OK mount requested. Device="FileChgr1-Dev1" (/opt/bacula/disk)
You have messages.
*m
25-Aug 10:50 bacula-dir JobId 24: Created new Volume="Vol-0018",
Pool="File", MediaType="File1" in catalog.
25-Aug 10:50 bacula-sd JobId 24: Labeled new Volume "Vol-0018" on file
device "FileChgr1-Dev1" (/opt/bacula/disk).
25-Aug 10:50 bacula-sd JobId 24: Wrote label to prelabeled Volume
"Vol-0018" on file device "FileChgr1-Dev1" (/opt/bacula/disk)
25-Aug 10:50 bacula-sd JobId 24: End of medium on Volume "Vol-0018"
Bytes=10,451,135 Blocks=162 at 25-Aug-2015 10:50.
25-Aug 10:50 bacula-dir JobId 24: Created new Volume="Vol-0019",
Pool="File", MediaType="File1" in catalog.
25-Aug 10:50 bacula-sd JobId 24: Labeled new Volume "Vol-0019" on file
device "FileChgr1-Dev1" (/opt/bacula/disk).
Environment used for the tests:
Linux bacula 3.16.0-30-generic #40~14.04.1-Ubuntu SMP Thu Jan 15 17:43:14
UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
Bacula 7.0.5
Best regards,
Ana
On Mon, Aug 24, 2015 at 6:24 PM, Dan Langille <d...@langille.org> wrote:
> I recently started using the Virtual Autochanger as described in 'Best
> Practices for Disk Based Backup' [1]
>
> It is working for me, but I encountered a problem with the audo-label
> process.
>
> My bacula-sd.conf and the full transcript of the logging problem is at:
>
> https://gist.github.com/dlangille/ef858722b30ae182b40f
>
> Ideas?
>
> A job stalled with:
>
> 24-Aug 01:43 crey-sd JobId 215534: Job dent.2015-08-24_00.58.35_01 is
> waiting. Cannot find any appendable volumes.
>
> I amended the pool definition to allow more Volumes, then went back to
> bconsole, expecting a mount command to create & label a new volume.
>
>
> *mount
> The defined Storage resources are:
> 1: CreyFile
> 2: CompaqStorageWorksTapeLibrary
> Select Storage resource (1-2): 1
> Connecting to Storage daemon CreyFile at crey.int.unixathome.org:9103 ...
> Enter autochanger drive[0]:
> Enter autochanger slot:
> 3999 Device "VirtualDisk" not found or could not be opened.
> *
>
> Then I tried label:
>
>
> *label
> The defined Storage resources are:
> 1: CreyFile
> 2: CompaqStorageWorksTapeLibrary
> Select Storage resource (1-2): 1
> Enter autochanger drive[0]: 2
> Enter new Volume name: .
> You have messages.
> *m
> 24-Aug 01:45 bacula-dir JobId 215534: Created new Volume="DiffAuto-4861",
> Pool="DiffFile", MediaType="File" in catalog.
> 24-Aug 01:45 crey-sd JobId 215534: Warning: mount.c:212 Open of file
> device "vDrive-1" (/usr/local/bacula/volumes) Volume "DiffAuto-4861"
> failed: ERR=file_dev.c:172 Could not
> open(/usr/local/bacula/volumes/DiffAuto-4861,OPEN_READ_WRITE,0640): ERR=No
> such file or directory
>
> 24-Aug 01:45 crey-sd JobId 215534: Warning: mount.c:212 Open of file
> device "vDrive-1" (/usr/local/bacula/volumes) Volume "DiffAuto-4861"
> failed: ERR=file_dev.c:172 Could not
> open(/usr/local/bacula/volumes/DiffAuto-4861,OPEN_READ_WRITE,0640): ERR=No
> such file or directory
>
> 24-Aug 01:45 crey-sd JobId 215534: Warning: mount.c:212 Open of file
> device "vDrive-1" (/usr/local/bacula/volumes) Volume "DiffAuto-4861"
> failed: ERR=file_dev.c:172 Could not
> open(/usr/local/bacula/volumes/DiffAuto-4861,OPEN_READ_WRITE,0640): ERR=No
> such file or directory
>
> 24-Aug 01:45 crey-sd JobId 215534: Warning: mount.c:212 Open of file
> device "vDrive-1" (/usr/local/bacula/volumes) Volume "DiffAuto-4861"
> failed: ERR=file_dev.c:172 Could not
> open(/usr/local/bacula/volumes/DiffAuto-4861,OPEN_READ_WRITE,0640): ERR=No
> such file or directory
>
> *m
> 24-Aug 01:45 crey-sd JobId 215534: Warning: mount.c:212 Open of file
> device "vDrive-1" (/usr/local/bacula/volumes) Volume "DiffAuto-4861"
> failed: ERR=file_dev.c:172 Could not
> open(/usr/local/bacula/volumes/DiffAuto-4861,OPEN_READ_WRITE,0640): ERR=No
> such file or directory
>
> Eventually, I again tried mount:
>
>
> mount
> The defined Storage resources are:
> 1: CreyFile
> 2: CompaqStorageWorksTapeLibrary
> Select Storage resource (1-2): 1
> Enter autochanger drive[0]:
> Enter autochanger slot:
> 3999 Device "VirtualDisk" not found or could not be opened.
> You have messages.
> *m
> 24-Aug 01:54 crey-sd JobId 215534: Wrote label to prelabeled Volume
> "DiffAuto-4861" on file device "vDrive-1" (/usr/local/bacula/volumes)
> 24-Aug 01:54 crey-sd JobId 215534: New volume "DiffAuto-4861" mounted on
> device "vDrive-1" (/usr/local/bacula/volumes) at 24-Aug-2015 01:54.
> *
>
>
> [1] - http://blog.bacula.org/whitepapers/CommunityDiskBackup.pdf
> —
> Dan Langille
> http://langille.org/
>
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
