Hello Uthra, Do you have more log lines for this job? Have you checked if you have the asked filset in this client? It seems that there is no data in this Debian client for the fileset configured.
Best regards, Ana On Mon, Jul 27, 2015 at 12:12 PM, Rao, Uthra R. (GSFC-672.0)[ADNET SYSTEMS INC] <uthra.r....@nasa.gov> wrote: > I am having a problem with a Debian client. Here is the information: > > > > - Bacula Server is a RHEL 6 : Bacula version 5.2.12 with a Tape > Library connected to it (LTO5) > > > > - Bacula client is Debian O.S. (bacula version 5.2.6) > > > > I am able to connect to the client from “bconsole”. I am also able to > start a backup job but it fails before it starts spooling. The bacula > report shows: > > > > *Fatal error: Network error with FD during Backup: ERR=No data available > 27-Jul 10:53 lindy-sd JobId 18794: Fatal error: append.c:160 Error reading > data header from FD. ERR=No data available* > > *Error: Director's comm line to SD dropped* > > > > I ran the bacua-sd in a debug mode and got the output: > > > > *****-sd: dircmd.c:175-0 Conn: Hello Director *****-dir calling > > *****-sd: dircmd.c:191-0 Got a DIR connection at 27-Jul-2015 10:53:38 > > *****-sd: cram-md5.c:72-0 send: auth cram-md5 <1298524369.1438008818@*****-sd> > ssl=0 > > *****-sd: cram-md5.c:131-0 cram-get received: auth cram-md5 > <1052271812.1438008818@*****-dir> ssl=0 > > *****-sd: cram-md5.c:150-0 sending resp to challenge: > y//5v5k543Fl2i/YWyF5uB > > *****-sd: dircmd.c:213-0 Message channel init completed. > > *****-sd: dircmd.c:220-0 <dird: cancel Job=explore.2015-07-27_10.52.05_03 > > > > *****-sd: dircmd.c:234-0 Do command: cancel > > *****-sd: askdir.c:345-18794 Update cat VolBytes=1024 > > *****-sd: askdir.c:368-18794 >dird CatReq > Job=explore.2015-07-27_10.52.05_03 UpdateMedia VolName=B01160L5 VolJobs=1 > VolFiles=1 VolBlocks=0 VolBytes=1024 VolMounts=3 VolErrors=0 > VolWrites=15122819 MaxVolBytes=0 > > EndTime=1438008823 VolStatus=Append Slot=32 relabel=0 InChanger=1 > VolReadTime=0 VolWriteTime=11237175650 VolFirstWritten=0 VolParts=0 > > *****-sd: acquire.c:528-18794 dir_update_vol_info. Release vol=B01160L5 > dev="Drive-1" (/dev/nst0) > > *****-sd: vol_mgr.c:549-18794 === clear in_use vol=B01160L5 > > *****-sd: vol_mgr.c:565-18794 === set not reserved vol=B01160L5 > num_writers=0 dev_reserved=0 dev="Drive-1" (/dev/nst0) > > *****-sd: acquire.c:545-18794 0 writers, 0 reserve, dev="Drive-1" > (/dev/nst0) > > *****-sd: acquire.c:584-18794 JobId=18794 broadcast wait_device_release at > 27-Jul-2015 10:53:43 > > *****-sd: acquire.c:605-18794 ===== Device "Drive-1" (/dev/nst0) released > by JobId=18794 > > *****-sd: spool.c:785-18794 Close attr spool file at 27-Jul-2015 10:53:43 > > *****-sd: append.c:326-18794 return from do_append_data() ok=0 > > *****-sd: dircmd.c:237-18794 Command run requests quit > > *****-sd: jcr.c:183-18794 write_last_jobs seek to 192 > > > > Any help is appreciated. > > > > Thank you. > > Uthra > > > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > >
------------------------------------------------------------------------------
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
