Hello Ana,
> I´m not sure about this, but I noticed something about the names for
> your storage:
>
> -------bacula-traymon.conf------
> Storage {
> Name = bacula-tux64-sd
> ...
> }
>
> ----bacula-dir-full.conf----
> Storage {
> Name = File
> ...
> }
>
> ----bacula-sd-full.conf-----
>
> Storage { # definition of myself
> Name = bacula-tux64-sd
> ...
> }
>
> Could you try "Name = bacula-tux64-sd" in your bacula-dir-full.conf or
> "Name = File" in your bacula-traymon.conf for the storage definition?
If I change this but 'bat' doesn't work any more (probably bconsole too
- not tested). Also it doesn't change the behaviour of traymonitor.
I had a look at the original bacula-dir.conf, e.g.
# Definition of a second file Virtual Autochanger device
# Possibly pointing to a different disk drive
Storage {
Name = File2
# Do not use "localhost" here
Address = localhost # N.B. Use a fully qualified name here
SDPort = 9103
Password = "@@SD_PASSWORD@@"
Device = FileChgr2
Media Type = File2
Maximum Concurrent Jobs = 10 # run up to 10 jobs a the same time
}
so this seems to be correct.
Also I notice a warning:
26-Jun 19:36 bacula-tux64-dir: Warning: Cannot bind port 9101: ERR=Die
angeforderte Adresse kann nicht zugewiesen werden: Retrying ...
english: Can't assign requested address. Retrying ...
Maybe it's relevant.
This configuration did work with bacula 5.x, I was not aware of thise
changes in 7.x. Maybe v5.x was more sloppy with config files ...
Thank you,
Olaf
>
> Best regards,
> Ana
>
> On Fri, Jun 26, 2015 at 2:36 AM, olx69 <ope-li...@gmx.de
> <mailto:ope-li...@gmx.de>> wrote:
>
> Hello Ane,
>
> > Sorry I was out a few days.... Have you tested your Bacula with these
> > "fake passwords"? Or you have just changed them for posting here? I
> > found no errors in your passwords configurations, but I'm not sure if
> > you are using these ones posted here. In the case you're not, could you
> > verify your director to storage daemon password configuration (not the
> > one for communicating with monitor)? The error message points to a
> > mismatch here.
>
>
> No, these are my real passwords! I trust in my secure LAN ;-)
>
> Thank you,
> Olaf
>
>
> > On Tue, Jun 23, 2015 at 11:04 AM, olx69 <ope-li...@gmx.de
> <mailto:ope-li...@gmx.de>
> > <mailto:ope-li...@gmx.de <mailto:ope-li...@gmx.de>>> wrote:
> >
> > Am 18.06.2015 um 16:13 schrieb olx69:
> > > Hello Ana,
> > >
> > >> Sorry I'm late in this post.
> > >> It seems there is still some password mismatching problems.
> > Could you
> > >> post your resources definitions for monitor (in
> bacula-dir.conf,
> > >> bacula-fd.conf and bacula-sd.conf) and your
> tray-monitor.conf?
> > >
> > > thank you for investigating! attached the files,
> >
> > no idea? Here the reduced password related part. Imo all is
> correct,
> > isn't it?
> >
> >
> > -------bacula-traymon.conf------
> > Monitor {
> > Name = bacula-tux64-mon
> > Password = "MON_DIR_PASSWORD" # password for the
> Directors
> > RefreshInterval = 3 seconds
> > }
> > Client {
> > Name = bacula-tux64-fd
> > Address = tux64.home.lan
> > Password = "MON_FD_PASSWORD" # password for
> FileDaemon
> > }
> > Storage {
> > Name = bacula-tux64-sd
> > Address = tux64.home.lan
> > Password = "MON_SD_PASSWORD" # password for
> StorageDaemon
> > }
> > Director {
> > Name = bacula-tux64-dir
> > Address = tux64.home.lan
> > }
> > ----bacula-dir-full.conf----
> > Director {
> > Name = bacula-tux64-dir
> > Password = "DIR_PASSWORD" # BConsole password
> > ....
> > }
> > Console {
> > Name = bacula-tux64-mon
> > Password = "MON_DIR_PASSWORD"
> > ...
> > }
> > Client {
> > Name = bacula-tux64-fd
> > Password = "FD_PASSWORD" # password for FileDaemon
> > ...
> > }
> > -----bacula-fd-full.conf-----
> > Director {
> > Name = bacula-tux64-dir
> > Password = "FD_PASSWORD"
> > }
> > Director {
> > Name = bacula-tux64-mon
> > Password = "MON_FD_PASSWORD"
> > }
> > ----bacula-sd-full.conf-----
> > Director {
> > Name = bacula-tux64-dir
> > Password = "SD_PASSWORD"
> > }
> > Director {
> > Name = bacula-tux64-mon
> > Password = "MON_SD_PASSWORD"
> > ...
> > }
> >
> >
>
> ------------------------------------------------------------------------------
> > Monitor 25 network devices or servers for free with OpManager!
> > OpManager is web-based network management software that monitors
> > network devices and physical & virtual servers, alerts via
> email & sms
> > for fault. Monitor 25 devices for free with no restriction.
> Download now
> > http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
> > _______________________________________________
> > Bacula-users mailing list
> > Bacula-users@lists.sourceforge.net
> <mailto:Bacula-users@lists.sourceforge.net>
> > <mailto:Bacula-users@lists.sourceforge.net
> <mailto:Bacula-users@lists.sourceforge.net>>
> > https://lists.sourceforge.net/lists/listinfo/bacula-users
> >
> >
>
>
>
> ------------------------------------------------------------------------------
> Monitor 25 network devices or servers for free with OpManager!
> OpManager is web-based network management software that monitors
> network devices and physical & virtual servers, alerts via email & sms
> for fault. Monitor 25 devices for free with no restriction. Download now
> http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> <mailto:Bacula-users@lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors
network devices and physical & virtual servers, alerts via email & sms
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
