Hi, everyone! Friday I updated just the "Pool from resource". Now I have just updated the seven tapes that were already configured on pool. I will check this setup during the week.
Thanks! João Kuchnier 2015-06-16 9:07 GMT-03:00 Bill Arlofski <waa-bac...@revpol.com>: > On 06/16/2015 01:40 AM, Radosław Korzeniewski wrote: > > Hello, > > > > 2015-06-15 20:07 GMT+02:00 João Kuchnier <joao.kuchn...@gmail.com > > <mailto:joao.kuchn...@gmail.com>>: > > > > Ana, Hi! > > > > I changed the configuration as you said, but I'm still having the > same > > problem. BAT and bconsole are only showing the last 28 days. This is > my > > pool configuration now: > > > > Pool { > > Name = xyz-tape-vol > > Pool Type = Backup > > AutoPrune = yes > > Recycle = yes > > Volume Use Duration = 7 days > > Volume Retention = 45 days > > File Retention = 45 days > > Job Retention = 45 days > > } > > > > The way I configured should show the last 45 days. Am I right? > > > > > > For all your new volumes - Yes. For all your old volumes, nope, unless > you > > update your volumes parameters with bconsole->update command. In both > cases > > you will need to wait 45 days to check if it is working correctly. > > > > best regards > > -- > > Radosław Korzeniewski > > > Hi everyone, > > If João really needs to see files list from these volumes, he can also > bscan > the old volumes to re-populate the jobs and file records into the database. > > > > João, > > After modifying your pool, you need to take some additional steps: > > First test config syntax - broken syntax can crash the director during > bconsole "reload", so test first after making changes. > > # bacula-dir -t -c /path/to/bacula-dir.conf > > > In bconsole: > > * reload > > * update pool=poolThatWasModified (repeat for each changed pool) > > * update --> Volume Parameters --> All Volumes from all Pools > > (Ignore any "Update Failed" db errors. These are caused by pools with no > volumes in them.) > > > Then, list the media and pools to verify that your retention periods are > what > you expect: > > * list media > > * show pools > > > After this all looks correct, (and if you really want to see the old > jobs/files), you can run bscan (see the utility.pdf manual) on all of your > volumes which have the jobs & files that you want to see in bconsole/BAT. > > (Of course that will work as long as those volumes have not been re-used) > > > Hope this helps! > > Bill > > > > -- > Bill Arlofski > http://www.revpol.com/bacula > -- Not responsible for anything below this line -- > > > ------------------------------------------------------------------------------ > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users >
------------------------------------------------------------------------------
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
