*I can see TWO problems:
On Fri, Sep 19, 2014 at 9:59 AM, Heitor Faria <hei...@bacula.com.br> wrote:
> Robert,
>
> I can see too problems:
>
> 1. bacula-sd non prompt connection: please solve this problem appart,
> using telnet to port 9103 and status storage commands to try to diagnose
> the connection problem.
>
> 2. Tape Library loading tapes problem: maybe a powercycle to the library
> will solve it, but it would nice to check the mtx.log file to fetch more
> information about this. It's likely that your autochanger isn't providing
> the new status after the tape is load. Other user solved this increasing
> all mtx-changer.conf sleep variables to 10 (seconds), witch is a valid
> action to take if you keep receiving this kind of errors:
> http://www.backupcentral.com/phpBB2/two-way-mirrors-of-external-mailing-lists-3/bacula-25/err-child-died-from-signal-15-termination-91750/
>
> Regards,
>
> Heitor
>
> On Thu, Sep 18, 2014 at 6:43 PM, RAT <rober...@netzero.net> wrote:
>
>> Still having issues (I took 10 days off for another project).
>>
>> I've tried a lot of things:
>>
>> I added bacula to the tape group, chown bacula:tape /dev/nst* & /dev/sg*,
>> I've ran the SELinux recommend:
>>
>> [root@bacula1 sbin]# grep bacula-sd /var/log/audit/audit.log |
>> audit2allow -M mypol
>> ******************** IMPORTANT ***********************
>> To make this policy package active, execute:
>> semodule -i mypol.pp
>>
>> I set SELinux to permissive, restarted bacula many times... No dice.
>>
>> Config looks like this (but I've tried using sg devices for Drive-*)
>>
>> Autochanger {
>> Name = DL4000
>> Device = Drive1
>> Device = Drive2
>> Device = Drive3
>> Device = Drive4
>> Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
>> Changer Device = /dev/sg4
>> }
>>
>> Device {
>> Name = Drive1 #
>> Drive Index = 0
>> Media Type = LTO-6-Drive
>> Archive Device = /dev/nst2
>> AutomaticMount = yes; # when device opened, read it
>> AlwaysOpen = yes;
>> RemovableMedia = yes;
>> RandomAccess = no;
>> AutoChanger = yes
>> # #
>> # # Enable the Alert command only if you have the mtx package loaded
>> # # Note, apparently on some systems, tapeinfo resets the SCSI controller
>> # # thus if you turn this on, make sure it does not reset your SCSI
>> # # controller. I have never had any problems, and smartctl does
>> # # not seem to cause such problems.
>> # #
>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>> # If you have smartctl, enable this, it has more info than tapeinfo
>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>> }
>>
>> My errors:
>>
>> [root@bacula1 sbin]# ./bconsole
>> Connecting to Director localhost:9101
>> 1000 OK: bacula-dir Version: 5.2.13 (19 February 2013)
>> Enter a period to cancel a command.
>> *label barcodes
>> Automatically selected Catalog: MyCatalog
>> Using Catalog "MyCatalog"
>> The defined Storage resources are:
>> 1: File
>> 2: DL4000
>> Select Storage resource (1-2): 2
>> Enter autochanger drive[0]: 4
>> Connecting to Storage daemon DL4000 at bacula1.usi.edu:9103 ...
>> ^C
>> [root@bacula1 sbin]# ./bconsole
>> Connecting to Director localhost:9101
>> 1000 OK: bacula-dir Version: 5.2.13 (19 February 2013)
>> Enter a period to cancel a command.
>> *label barcodes
>> Automatically selected Catalog: MyCatalog
>> Using Catalog "MyCatalog"
>> The defined Storage resources are:
>> 1: File
>> 2: DL4000
>> Select Storage resource (1-2): 2
>> Connecting to Storage daemon DL4000 at bacula1.usi.edu:9103 ...
>> Enter autochanger drive[0]: 4
>> Connecting to Storage daemon DL4000 at bacula1.usi.edu:9103 ...
>> 3306 Issuing autochanger "slots" command.
>> Device "Drive1" has 48 slots.
>> Connecting to Storage daemon DL4000 at bacula1.usi.edu:9103 ...
>> 3306 Issuing autochanger "list" command.
>> The following Volumes will be labeled:
>> Slot Volume
>> ==============
>> 10 000047L6
>> 11 000038L6
>> 14 000039L6
>> 15 000053L6
>> 18 000023L6
>> 19 000059L6
>> Do you want to label these Volumes? (yes|no): yes
>> Defined Pools:
>> 1: Default
>> 2: File
>> 3: Scratch
>> Select the Pool (1-3): 3
>> Connecting to Storage daemon DL4000 at bacula1.usi.edu:9103 ...
>> Sending label command for Volume "000047L6" Slot 10 ...
>> 3307 Issuing autochanger "unload slot 14, drive 0" command.
>> 3304 Issuing autochanger "load slot 10, drive 0" command.
>> 3992 Bad autochanger "load slot 10, drive 0": ERR=Child died from signal
>> 15: Termination.
>> Results=Program killed by Bacula (timeout)
>>
>> Label command failed for Volume 000047L6.
>> Sending label command for Volume "000038L6" Slot 11 ...
>> 3307 Issuing autochanger "unload slot 10, drive 0" command.
>> 3304 Issuing autochanger "load slot 11, drive 0" command.
>> 3992 Bad autochanger "load slot 11, drive 0": ERR=Child died from signal
>> 15: Termination.
>> Results=Program killed by Bacula (timeout)
>>
>> Label command failed for Volume 000038L6.
>> Sending label command for Volume "000039L6" Slot 14 ...
>> 3307 Issuing autochanger "unload slot 11, drive 0" command.
>> 3304 Issuing autochanger "load slot 14, drive 0" command.
>> 3992 Bad autochanger "load slot 14, drive 0": ERR=Child died from signal
>> 15: Termination.
>> Results=Program killed by Bacula (timeout)
>>
>> Label command failed for Volume 000039L6.
>> Sending label command for Volume "000053L6" Slot 15 ...
>> 3307 Issuing autochanger "unload slot 14, drive 0" command.
>> 3304 Issuing autochanger "load slot 15, drive 0" command.
>> 3992 Bad autochanger "load slot 15, drive 0": ERR=Child died from signal
>> 15: Termination.
>> Results=Program killed by Bacula (timeout)
>>
>> Label command failed for Volume 000053L6.
>> Sending label command for Volume "000023L6" Slot 18 ...
>> 3307 Issuing autochanger "unload slot 15, drive 0" command.
>> 3304 Issuing autochanger "load slot 18, drive 0" command.
>> 3992 Bad autochanger "load slot 18, drive 0": ERR=Child died from signal
>> 15: Termination.
>> Results=Program killed by Bacula (timeout)
>>
>> Label command failed for Volume 000023L6.
>> Sending label command for Volume "000059L6" Slot 19 ...
>> 3307 Issuing autochanger "unload slot 18, drive 0" command.
>> 3304 Issuing autochanger "load slot 19, drive 0" command.
>> 3992 Bad autochanger "load slot 19, drive 0": ERR=Child died from signal
>> 15: Termination.
>> Results=Program killed by Bacula (timeout)
>>
>> Label command failed for Volume 000059L6.
>>
>> *
>>
>> Robert Threet
>> http://yesistilluseperl.blogspot.com/
>>
>> ____________________________________________________________
>> NetZero now offers 4G mobile broadband. Sign up now.
>> http://www.netzero.net/?refcd=NZINTISP0512T4GOUT1
>>
>>
>> ------------------------------------------------------------------------------
>> Slashdot TV. Video for Nerds. Stuff that Matters.
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk
>> _______________________________________________
>> Bacula-users mailing list
>> Bacula-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>
>
>
> --
> ============================================
> Heitor Medrado de Faria | Need Bacula training? 10% discount coupon code
> at Udemy: bacula-users
> <https://www.udemy.com/bacula-backup-software/?couponCode=bacula-users>
> +55 61 2021-8260
> +55 61 8268-4220
> Site: www.bacula.com.br
> Facebook: heitor.faria <http://www.facebook.com/heitor.faria>
> Gtalk: heitorfa...@gmail.com
> ============================================
>
--
============================================
Heitor Medrado de Faria | Need Bacula training? 10% discount coupon code at
Udemy: bacula-users
<https://www.udemy.com/bacula-backup-software/?couponCode=bacula-users>
+55 61 2021-8260
+55 61 8268-4220
Site: www.bacula.com.br
Facebook: heitor.faria <http://www.facebook.com/heitor.faria>
Gtalk: heitorfa...@gmail.com
============================================
------------------------------------------------------------------------------
Slashdot TV. Video for Nerds. Stuff that Matters.
http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
