Dan,
Thanks for the reply. I tried this this morning and still failed the
restore. I see during the Status Storage - Storage_Bluewhale where the
"Running Jobs section shows Files=0, Bytes=0 Bytes/sec=0. However in the
Device Status section, Device "File_bluewhale" is mounted and the Total
Bytes Read and Block Read go up.... Now with the simplefied config It
seems to have lost it's Pool.
I'm confused... I changed the where to restore to /nas/users/admin/backups and
changed in the client config to remove the fifo headache... But it still
is trying to use it...
Here is the error from the log :
08-Sep 11:51 BS01-DIR1 JobId 12897: Start Restore Job
Restore_mail_bluewhale.2014-09-08_11.51.55_03
08-Sep 11:51 BS01-DIR1 JobId 12897: Using Device "File_bluewhale"
08-Sep 11:51 BS01-SD1 JobId 12897: Ready to read from volume "mail-0386" on
device "File_bluewhale" (/nas/bacula/bluewhale).
08-Sep 11:51 BS01-SD1 JobId 12897: Forward spacing Volume "mail-0386" to
file:block 0:219.
08-Sep 12:14 BS01-SD1 JobId 12897: End of Volume at file 28 on device
"File_bluewhale" (/nas/bacula/bluewhale), Volume "mail-0386"
08-Sep 12:14 BS01-SD1 JobId 12897: End of all volumes.
08-Sep 11:52 BS01-FD1 JobId 12897: Error: create_file.c:292 Could not open
/nas/users/admin/backups/data/backups/mail/fifo/mail.tar: ERR=Interrupted
system call
08-Sep 12:14 BS01-DIR1 JobId 12897: Bacula BS01-DIR1 5.2.2 (26Nov11):
Build OS: x86_64-unknown-linux-gnu ubuntu 11.10
JobId: 12897
Job: Restore_mail_bluewhale.2014-09-08_11.51.55_03
Restore Client: besc-bs01
Start time: 08-Sep-2014 11:51:57
End time: 08-Sep-2014 12:14:09
Files Expected: 1
Files Restored: 0
Bytes Restored: 0
Rate: 0.0 KB/s
FD Errors: 0
FD termination status: OK
SD termination status: OK
Termination: Restore OK -- warning file count mismatch
08-Sep 12:14 BS01-DIR1 JobId 12897: Begin pruning Jobs older than 15 days .
08-Sep 12:14 BS01-DIR1 JobId 12897: No Jobs found to prune.
08-Sep 12:14 BS01-DIR1 JobId 12897: Begin pruning Files.
08-Sep 12:14 BS01-DIR1 JobId 12897: No Files found to prune.
08-Sep 12:14 BS01-DIR1 JobId 12897: End auto prune.
What is a file count mismatch?
Here is the status during a restore :
Connecting to Storage daemon Storage_bluewhale at 10.10.10.199:9103
BS01-SD1 Version: 5.2.2 (26 November 2011) x86_64-unknown-linux-gnu ubuntu
11.10
Daemon started 08-Sep-14 11:48. Jobs: run=0, running=0.
Heap: heap=598,016 smbytes=386,922 max_bytes=405,712 bufs=947 max_bufs=949
Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8 mode=0,0
Running Jobs:
Reading: Full Restore job Restore_mail_bluewhale JobId=12897
Volume="mail-0386"
pool="Pool_mail_bluewhale" device="File_bluewhale"
(/nas/bacula/bluewhale)
Files=0 Bytes=0 Bytes/sec=0
FDReadSeqNo=6 in_msg=6 out_msg=84529 fd=6
====
Jobs waiting to reserve a drive:
====
Terminated Jobs:
JobId Level Files Bytes Status Finished Name
===================================================================
12889 Incr 31 67.94 M OK 08-Sep-14 00:01
Backup_os_besc-unixmgr01
12891 Full 4 501.0 M OK 08-Sep-14 00:05 Backup_app_dev
12888 Incr 437 1.158 G OK 08-Sep-14 00:06
Backup_os_besc-bs01
12890 Incr 0 0 Other 08-Sep-14 00:30
Backup_os_bluewhale
12893 Full 0 0 Other 08-Sep-14 01:30
Backup_mail_bluewhale
12884 Full 2,361,101 154.6 G OK 08-Sep-14 04:46 Backup_os_mako
12892 Full 4 54.40 G OK 08-Sep-14 05:56 Backup_app_mako
12894 0 0 OK 08-Sep-14 08:53
Restore_mail_bluewhale
12895 0 0 OK 08-Sep-14 09:28
Restore_mail_bluewhale
12896 0 0 OK 08-Sep-14 10:10
Restore_mail_bluewhale
====
Device status:
Device "File_asterisk" (/nas/bacula/asterisk) is not open.
Device "File_besc-4dvapp" (/nas/bacula/besc-4dvapp) is not open.
Device "File_besc-bs01" (/nas/bacula/besc-bs01) is not open.
Device "File_besc-unixmgr01" (/nas/bacula/besc-unixmgr01) is not open.
Device "File_bluewhale" (/nas/bacula/bluewhale) is mounted with:
Volume: mail-0386
Pool: *unknown*
Media type: NAS_bluewhale
Total Bytes Read=1,121,412,096 Blocks Read=17,383 Bytes/block=64,512
Positioned at File=0 Block=1,121,412,275
Device "File_demo" (/nas/bacula/demo) is not open.
Device "File_dev" (/nas/bacula/dev) is not open.
Device "File_mako" (/nas/bacula/mako) is not open.
Device "File_qa" (/nas/bacula/qa) is not open.
Device "File_qa2" (/nas/bacula/qa2) is not open.
Device "File_smart" (/nas/bacula/smart) is not open.
====
Used Volume status:
mail-0386 on device "File_bluewhale" (/nas/bacula/bluewhale)
Reader=1 writers=0 devres=0 volinuse=1
mail-0386 read volume JobId=12897
====
====
Here is my simplified client config:
#********************************************************************************
# bluewhale
#********************************************************************************
Client {
Name = bluewhale
Address = bluewhale.bnesystems.com
Catalog = BS01-Catalog
Password = "xxxxxxxxx"
FileRetention = 365 days
JobRetention = 365 days
AutoPrune = yes
MaximumConcurrentJobs = 1
}
Job {
Name = Restore_mail_bluewhale
FileSet = Full_mail_bluewhale
Type = Restore
Pool = Pool_mail_bluewhale
Client = bluewhale
Messages = Standard
}
Pool {
Name = Pool_mail_bluewhale
PoolType = Backup
Storage = Storage_bluewhale
MaximumVolumeJobs = 1
CatalogFiles = yes
AutoPrune = yes
VolumeRetention = 365 days
Recycle = yes
LabelFormat = "mail-"
}
Storage {
Name = Storage_bluewhale
Address = 10.10.10.199
SDPort = 9103
Password = "xxxxxxx"
Device = File_bluewhale
MediaType = NAS_bluewhale
MaximumConcurrentJobs = 1
}
FileSet {
Name = Full_mail_bluewhale
Include {
Options {
signature=SHA1
# readfifo=yes
}
File="/mail.tar"
}
}
Thanks for the help. I appreciate all the input.
--Kenny
On Sun, Sep 7, 2014 at 8:22 AM, Dan Langille <d...@langille.org> wrote:
> I suggest removing the before & after scripts.
>
> --
> Dan Langille
> http://langille.org/
>
>
> > On Sep 6, 2014, at 8:38 PM, Kenny Noe <knoe...@gmail.com> wrote:
> >
> > Dan,
> >
> > Appreciate the reply.... Yes this is exactly what I want to do.
> > However when I try to just do a "simple" restore, the job finishes
> > with the error previously given.
> >
> > Any suggestions to do this would be appreciated.
> >
> > Thanks --Kenny
> >
> >> On Sat, Sep 6, 2014 at 5:51 PM, Dan Langille <d...@langille.org> wrote:
> >>
> >> On Sep 5, 2014, at 5:48 PM, Kenny Noe <knoe...@gmail.com> wrote:
> >>
> >> Birre,
> >>
> >> Thanks for the reply. I guess this is where I get lost...
> >>
> >>
> >>
> >> The fifo is reading a file that was created in the pre-process called
> >> mail.tar. The mail.tar is made from the following directories
> /opt/zimbra
> >> and /var/mail/zimbra. This is where the Zimbra files and mailstore were
> >> kept.
> >>
> >> This pre-process is a script that has this :
> >>
> >> MailBackup.bash
> >> #!/bin/bash
> >>
> >> exec >/dev/null
> >>
> >> MKDIR="/bin/mkdir"
> >> MKFIFO="/usr/bin/mkfifo"
> >> RM="/bin/rm"
> >> TAR="/bin/tar"
> >>
> >> DEFCODE=0
> >> DUMPBASE="/data/backups"
> >>
> >> errCode=${DEFCODE}
> >> mailDir="/var/mail/zimbra"
> >> zimbraDir="/opt/zimbra"
> >>
> >> Main()
> >> {
> >> service zimbra stop
> >>
> >> RunMailRestore
> >>
> >> service zimbra start
> >>
> >> ExitScript ${errCode}
> >> }
> >>
> >> RunMailRestore()
> >> {
> >> EXTENSION=".tar"
> >>
> >> dumpDir="${DUMPBASE}/mail"
> >> fifoDir="${dumpDir}/fifo"
> >>
> >> RebuildFifoDir
> >>
> >> ${MKFIFO} ${fifoDir}/mail${EXTENSION}
> >>
> >> ${TAR} -xpf ${fifoDir}/mail${EXTENSION} 2>&1 </dev/null &
> >> }
> >>
> >> RebuildFifoDir()
> >> {
> >> if [ -d ${fifoDir} ]
> >> then
> >> ${RM} -rf ${fifoDir}
> >> fi
> >>
> >> ${MKDIR} -p ${fifoDir}
> >> }
> >>
> >> ExitScript()
> >> {
> >> exit ${1}
> >> }
> >>
> >> Main
> >>
> >> The restore script simply does a tar xpf instead of a tar cpf.
> >>
> >>
> >> Perhaps instead of doing that, just restore the data, and then do the
> tar
> >> xpf later.
>
------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
