I have Hp LTO-3 scsi device https://h10057.www1.hp.com/ecomcat/hpcatalog/specs/provisioner/05/Q1539B.htm witch worked for several years. Yesterday i wanted to make a bicg backup (about 3 TB). I had 10 labeled new casstes (400GB). So i turned on backing up through web-bacula System is openSuse 11 wg-srv-dir Version: 2.4.3 So, 3 tapes worked fine, on a fourth i saw this messages:
2014-07-07 17:58:24 wg-srv-sd JobId 319: New volume "Cassette_144" mounted on device "Ultrium960" (/dev/st0) at 07-Jul-2014 17:58. 2014-07-07 18:57:16 wg-srv-sd JobId 319: Error: block.c:568 Write error at 21:1902 on device "Ultrium960" (/dev/st0). ERR=Input/output error. 2014-07-07 19:12:16 wg-srv-sd JobId 319: Error: Error writing final EOF to tape. This Volume may not be readable. dev.c:1681 ioctl MTWEOF error on "Ultrium960" (/dev/st0). ERR=Input/output error. 2014-07-07 19:12:16 wg-srv-sd JobId 319: End of medium on Volume "Cassette_144" Bytes=21,121,357,824 Blocks=327,401 at 07-Jul-2014 19:12. 2014-07-07 19:12:16 wg-srv-sd JobId 319: 3307 Issuing autochanger "unload slot 144, drive 2" command. So only in several hours tape was pulled off. In a morning i inserted a new 145 tape. But nothing happend, it still waited for a tape, even it was in already. So i canceled job in an hour. After that i attemped to label new tape - and the same story - it even does not see a tape inside of it (145), i manually pulled off tape (through the button) and inserrted a new tape without label, baclula did not see it anyway. Here is a full log of backup: 2014-07-07 11:58:42 wg-srv-dir JobId 319: Start Backup JobId 319, Job=wg-archive2.2014-07-07_11.58.41 2014-07-07 11:58:42 wg-srv-dir JobId 319: Using Device "Ultrium960" 2014-07-07 11:58:42 wg-srv-sd JobId 319: 3307 Issuing autochanger "unload slot 129, drive 2" command. 2014-07-07 11:59:01 wg-srv-sd JobId 319: 3304 Issuing autochanger "load slot 141, drive 2" command. 2014-07-07 12:00:31 wg-srv-sd JobId 319: 3305 Autochanger "load slot 141, drive 2", status is OK. 2014-07-07 12:00:38 wg-srv-sd JobId 319: Volume "Cassette_141" previously written, moving to end of data. 2014-07-07 12:01:37 wg-srv-sd JobId 319: Ready to append to end of Volume "Cassette_141" at file=278. 2014-07-07 12:42:28 wg-srv-sd JobId 319: End of Volume "Cassette_141" at 413:3145 on device "Ultrium960" (/dev/st0). Write of 64512 bytes got -1. 2014-07-07 12:42:34 wg-srv-sd JobId 319: Re-read of last block succeeded. 2014-07-07 12:42:34 wg-srv-sd JobId 319: End of medium on Volume "Cassette_141" Bytes=411,986,340,864 Blocks=6,386,196 at 07-Jul-2014 12:42. 2014-07-07 12:42:34 wg-srv-sd JobId 319: 3307 Issuing autochanger "unload slot 141, drive 2" command. 2014-07-07 12:43:34 wg-srv-sd JobId 319: 3301 Issuing autochanger "loaded? drive 2" command. 2014-07-07 12:43:34 wg-srv-sd JobId 319: 3302 Autochanger "loaded? drive 2", result: nothing loaded. 2014-07-07 12:43:34 wg-srv-sd JobId 319: 3304 Issuing autochanger "load slot 142, drive 2" command. 2014-07-07 12:52:05 wg-srv-sd JobId 319: 3305 Autochanger "load slot 142, drive 2", status is OK. 2014-07-07 12:52:16 wg-srv-sd JobId 319: Wrote label to prelabeled Volume "Cassette_142" on device "Ultrium960" (/dev/st0) 2014-07-07 12:52:16 wg-srv-sd JobId 319: New volume "Cassette_142" mounted on device "Ultrium960" (/dev/st0) at 07-Jul-2014 12:52. 2014-07-07 15:18:36 wg-srv-sd JobId 319: End of Volume "Cassette_142" at 412:11565 on device "Ultrium960" (/dev/st0). Write of 64512 bytes got -1. 2014-07-07 15:18:46 wg-srv-sd JobId 319: Re-read of last block succeeded. 2014-07-07 15:18:46 wg-srv-sd JobId 319: End of medium on Volume "Cassette_142" Bytes=412,719,713,280 Blocks=6,397,564 at 07-Jul-2014 15:18. 2014-07-07 15:18:46 wg-srv-sd JobId 319: 3307 Issuing autochanger "unload slot 142, drive 2" command. 2014-07-07 15:19:39 wg-srv-sd JobId 319: 3301 Issuing autochanger "loaded? drive 2" command. 2014-07-07 15:19:39 wg-srv-sd JobId 319: 3302 Autochanger "loaded? drive 2", result: nothing loaded. 2014-07-07 15:19:39 wg-srv-sd JobId 319: 3304 Issuing autochanger "load slot 143, drive 2" command. 2014-07-07 15:21:39 wg-srv-sd JobId 319: 3305 Autochanger "load slot 143, drive 2", status is OK. 2014-07-07 15:21:50 wg-srv-sd JobId 319: Wrote label to prelabeled Volume "Cassette_143" on device "Ultrium960" (/dev/st0) 2014-07-07 15:21:50 wg-srv-sd JobId 319: New volume "Cassette_143" mounted on device "Ultrium960" (/dev/st0) at 07-Jul-2014 15:21. 2014-07-07 17:27:02 wg-srv-sd JobId 319: End of Volume "Cassette_143" at 412:1 on device "Ultrium960" (/dev/st0). Write of 64512 bytes got -1. 2014-07-07 17:27:10 wg-srv-sd JobId 319: Re-read of last block succeeded. 2014-07-07 17:27:10 wg-srv-sd JobId 319: End of medium on Volume "Cassette_143" Bytes=411,973,696,512 Blocks=6,386,000 at 07-Jul-2014 17:27. 2014-07-07 17:27:10 wg-srv-sd JobId 319: 3307 Issuing autochanger "unload slot 143, drive 2" command. 2014-07-07 17:28:21 wg-srv-sd JobId 319: 3301 Issuing autochanger "loaded? drive 2" command. 2014-07-07 17:28:21 wg-srv-sd JobId 319: 3302 Autochanger "loaded? drive 2", result: nothing loaded. 2014-07-07 17:28:21 wg-srv-sd JobId 319: 3304 Issuing autochanger "load slot 144, drive 2" command. 2014-07-07 17:58:13 wg-srv-sd JobId 319: 3305 Autochanger "load slot 144, drive 2", status is OK. 2014-07-07 17:58:24 wg-srv-sd JobId 319: Wrote label to prelabeled Volume "Cassette_144" on device "Ultrium960" (/dev/st0) 2014-07-07 17:58:24 wg-srv-sd JobId 319: New volume "Cassette_144" mounted on device "Ultrium960" (/dev/st0) at 07-Jul-2014 17:58. 2014-07-07 18:57:16 wg-srv-sd JobId 319: Error: block.c:568 Write error at 21:1902 on device "Ultrium960" (/dev/st0). ERR=Input/output error. 2014-07-07 19:12:16 wg-srv-sd JobId 319: Error: Error writing final EOF to tape. This Volume may not be readable. dev.c:1681 ioctl MTWEOF error on "Ultrium960" (/dev/st0). ERR=Input/output error. 2014-07-07 19:12:16 wg-srv-sd JobId 319: End of medium on Volume "Cassette_144" Bytes=21,121,357,824 Blocks=327,401 at 07-Jul-2014 19:12. 2014-07-07 19:12:16 wg-srv-sd JobId 319: 3307 Issuing autochanger "unload slot 144, drive 2" command. 2014-07-08 02:59:14 wg-srv-sd JobId 319: 3301 Issuing autochanger "loaded? drive 2" command. 2014-07-08 02:59:14 wg-srv-sd JobId 319: 3302 Autochanger "loaded? drive 2", result: nothing loaded. 2014-07-08 02:59:14 wg-srv-sd JobId 319: 3304 Issuing autochanger "load slot 145, drive 2" command. 2014-07-08 12:21:12 wg-archive2-fd JobId 319: Fatal error: backup.c:892 Network send error to SD. ERR=Input/output error 2014-07-08 12:21:12 wg-srv-sd JobId 319: Job wg-archive2.2014-07-07_11.58.41 marked to be canceled. 2014-07-08 12:21:14 wg-srv-sd JobId 319: Job wg-archive2.2014-07-07_11.58.41 marked to be canceled. 2014-07-08 12:21:20 wg-srv-dir JobId 319: Bacula wg-srv-dir 2.4.3 (10Oct08): 08-Jul-2014 12:21:20 Build OS: i686-pc-linux-gnu suse 11.0 JobId: 319 Job: wg-archive2.2014-07-07_11.58.41 Backup Level: Full Client: "wg-archive2-fd" 2.4.3 (10Oct08) i686-pc-linux-gnu,suse,11.0 FileSet: "wg-archive-fs" 2008-11-27 20:02:38 Pool: "Default" (From Job resource) Storage: "Ultrium960" (From Job resource) Scheduled time: 07-Jul-2014 11:58:39 Start time: 07-Jul-2014 11:58:42 End time: 08-Jul-2014 12:21:20 Elapsed time: 1 day 22 mins 38 secs Priority: 10 FD Files Written: 727 SD Files Written: 0 FD Bytes Written: 980,284,578,636 (980.2 GB) SD Bytes Written: 0 (0 B) Rate: 11170.3 KB/s Software Compression: None VSS: no Storage Encryption: no Volume name(s): Cassette_141|Cassette_142|Cassette_143|Cassette_144 Volume Session Id: 23 Volume Session Time: 1375795922 Last Volume Bytes: 64,512 (64.51 KB) Non-fatal FD errors: 0 SD Errors: 0 FD termination status: Canceled SD termination status: Error Termination: Backup Canceled Anyway in a var/log/messages was this: Jul 7 18:10:40 wg-srv kernel: st0: Sense Key : Medium Error [deferred] Jul 7 18:10:40 wg-srv kernel: Info fld=0xfc00 Jul 7 18:10:40 wg-srv kernel: st0: Add. Sense: Write error Jul 7 18:25:40 wg-srv kernel: st0: Error 80000 (sugg. bt 0x0, driver bt 0x0, host bt 0x8). Jul 7 18:42:15 wg-srv kernel: st0: Error 80000 (sugg. bt 0x0, driver bt 0x0, host bt 0x8). Jul 7 18:57:16 wg-srv kernel: st0: Error 80000 (sugg. bt 0x0, driver bt 0x0, host bt 0x8). Jul 7 19:12:16 wg-srv kernel: st0: Error 80000 (sugg. bt 0x0, driver bt 0x0, host bt 0x8). Jul 7 23:05:37 wg-srv kernel: st0: Error 80000 (sugg. bt 0x0, driver bt 0x0, host bt 0x8). Jul 8 02:58:57 wg-srv kernel: st0: Error 80000 (sugg. bt 0x0, driver bt 0x0, host bt 0x8). Jul 7 18:25:40 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=e3bb8980) Jul 7 18:25:40 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=e3bb8980) Jul 7 18:25:50 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=e3bb8980) Jul 7 18:25:51 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=e3bb8980) Jul 7 18:26:01 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7a35380) Jul 7 18:26:01 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7a35380) Jul 7 18:26:11 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7a35980) Jul 7 18:26:11 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7a35980) Jul 7 18:26:21 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=e3bb8580) Jul 7 18:26:22 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=e3bb8580) Jul 7 18:26:32 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7a35580) Jul 7 18:26:32 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7a35580) Jul 7 18:26:42 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7838480) Jul 7 18:26:43 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7838480) Jul 7 18:26:53 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7838980) Jul 7 18:26:53 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7838980) Jul 7 18:27:03 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7a35180) Jul 7 18:27:03 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7a35180) Jul 7 18:27:13 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7a35680) Jul 7 18:27:14 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7a35680) Jul 7 18:42:15 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7838b80) Jul 7 18:42:15 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7838b80) Jul 7 18:57:15 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7838180) Jul 7 18:57:16 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7838180) Jul 7 19:12:16 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7838180) Jul 7 19:12:16 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7838180) Jul 7 23:05:36 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7a35280) Jul 7 23:05:37 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7a35280) Jul 8 02:58:57 wg-srv kernel: mptscsih: ioc0: attempting task abort! (sc=f7838780) Jul 8 02:58:57 wg-srv kernel: mptscsih: ioc0: task abort: SUCCESS (sc=f7838780) mt -f /dev/st0 status mt: /dev/st0: rmtopen failed: Device or resource busy /usr/sbin/btape -v -c /etc/bacula/bacula-sd.conf /dev/st0 Tape block granularity is 1024 bytes. btape: butil.c:285 Using device: "/dev/st0" for writing. 08-Jul 19:31 btape JobId 0: 3301 Issuing autochanger "loaded? drive 2" command. 08-Jul 19:31 btape JobId 0: 3302 Autochanger "loaded? drive 2", result: nothing loaded. And nothing more, just hanging /usr/sbin/tapeinfo -f /dev/st0 cannot open SCSI device '/dev/st0' - Device or resource busy But sg0 device is working with tapeinfo(but not with mt and btape): /usr/sbin/tapeinfo -f /dev/sg0 Product Type: Tape Drive Vendor ID: 'HP ' Product ID: 'Ultrium 3-SCSI ' Revision: 'G64D' Attached Changer API: No SerialNumber: 'xxxxxxxxxx' MinBlock: 1 MaxBlock: 16777215 SCSI ID: 3 SCSI LUN: 0 Ready: yes BufferedMode: yes Medium Type: Not Loaded Density Code: 0x44 BlockSize: 0 DataCompEnabled: yes DataCompCapable: yes DataDeCompEnabled: yes CompType: 0x1 DeCompType: 0x1 BOP: yes Block Position: 0 Partition 0 Remaining Kbytes: 400308 Partition 0 Size in Kbytes: 400308 ActivePartition: 0 EarlyWarningSize: 0 NumPartitions: 0 MaxPartitions: 0 I even changed scsi card, which is in hp server (we have a backup card), reinserted cables, turned off/on LTO-device, but nothing happend, no any messages, it is just like lto device is broken. But how can i really be sure that device is dead? +---------------------------------------------------------------------- |This was sent by kkuznet...@web.1tv.ru via Backup Central. |Forward SPAM to ab...@backupcentral.com. +---------------------------------------------------------------------- ------------------------------------------------------------------------------ Open source business process management suite built on Java and Eclipse Turn processes into business applications with Bonita BPM Community Edition Quickly connect people, data, and systems into organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards http://p.sf.net/sfu/Bonitasoft _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
