Hi,
Maybe it should be SDAddress = 192.168.0.5 instead of Address = 192.168.0.5?
Storage {
Name = jukebox-p
Address = 192.168.0.5
SDPort = 9103
Password = <password>
Regards,
Ana
On Thu, Sep 19, 2013 at 7:02 AM, Radosław Korzeniewski <
rados...@korzeniewski.net> wrote:
> Hello,
>
> 2013/9/18 Robert M. Candey <robert.m.can...@nasa.gov>
>
> **
>> As a follow up on Uthra Rao's question ("client connect to storage daemon
>> problem"), here's a different explanation of what we are trying to
>> accomplish, plus the requested config files.
>>
>> We have been successfully using Bacula for many years and now need to add
>> clients on a separate high speed network (due to the volume of data). We
>> added a 10 GbE switch and network interface cards to the large data clients
>> (but not all) and the backup server, to form a private network
>> (192.168.0.*).
>>
>
> Great. I've configured this kind of setup many times.
>
>
>>
>> Since the Storage resource is defined with one address (on the regular
>> network) and not its address on the private network, we get errors:
>>
>> Fatal error: Authorization key rejected by Storage daemon.
>> Fatal error: Failed to authenticate Storage daemon.
>> Fatal error: Bad response to Storage command: wanted 2000 OK storage ,
>> got 2902 Bad storage
>>
>>
> You need to define a second Storage resource pointed to the same bacula-sd
> instance. I did it by simple copy-paste of current Storage resource
> configuration and change a its name and address parameters. I leave
> password, device and media type unchanged.
> This operation does not interference with current setup, so all your
> current jobs should run unaffected. If not, you make a mistake somewhere.
> Take an original config and start again.
>
>
>> Below are the beginning of our config files. The "*Address = 0.0.0.0"
>> was added based on an old comment on the list, to ensure the services
>> listen to all network interfaces (which they seem to do by default anyway).
>>
>>
> Absolutely. It listen by default. And it is not the problem. :)
>
>
>> I assume the requirement to match the storage server name/address is
>> for added security over the passwords, but it makes this situation much
>> more difficult.
>>
>
> No. To handle backups Bacula Director connects Bacula SD and authorize, so
> the name of the Director and Storage Password should match.
> See:
> http://bacula.org/5.2.x-manuals/en/main/main/Customizing_Configuration_F.html#SECTION001340000000000000000
>
> The name of the Storage at bacula-sd.conf doesn't matter.
>
>
>>
>> Has anyone succeeded at running one backup server with clients on two
>> networks and network cards? Any suggestions for this? Thanx.
>>
>
> I configured it many times. :)
>
>
>>
>> Robert Candey
>> *
>> *
>>
>> Director {
>> Name = backup-dir
>>
> It is important.
>
>
>> DirAddress = 0.0.0.0
>> DIRport = 9101 # where we listen for UA connections
>> QueryFile = "/usr/local/bacula/etc/query.sql"
>> WorkingDirectory = "/var/bacula/working"
>> PidDirectory = "/var/run"
>> ScriptsDirectory = /usr/local/etc/bacula-clients
>> Maximum Concurrent Jobs = 4
>> Password = <password> # Console password
>> Messages = Daemon
>> fd connect timeout = 60sec
>> Heartbeat Interval = 60
>> }
>> JobDefs {
>> Name = standard-job
>> Type = Backup
>> Level = Incremental
>> FileSet = standard-set
>> Schedule = standard-sched
>> Storage = jukebox
>> Messages = Standard
>> Pool = server-partial
>> Priority = 10
>> Write Bootstrap = "/var/bacula/working/BootStrap/%c.bsr"
>> Spool data = yes
>> }
>> JobDefs {
>> Name = standard-job-p
>> Type = Backup
>> Level = Incremental
>> FileSet = standard-set
>> Schedule = standard-sched
>> Storage = jukebox-p
>> Messages = Standard
>> Pool = server-partial
>> Priority = 10
>> Write Bootstrap = "/var/bacula/working/BootStrap/%c.bsr"
>> Spool data = yes
>> }
>>
>> Storage {
>> Name = jukebox
>> Address = backup.gsfc.nasa.gov
>> SDPort = 9103
>> Password = <password>
>>
> Above password has to match the password at bacula-sd.conf.
>
>
>> Device = Autochanger
>> Media Type = LTO-5
>> autochanger = yes
>> maximum concurrent jobs = 20
>> }
>>
>> Storage {
>> Name = jukebox-p
>> Address = 192.168.0.5
>> SDPort = 9103
>> Password = <password>
>>
> It has to be the same password as above Storage resource.
>
>
>> Device = Autochanger
>> Media Type = LTO-5
>> autochanger = yes
>> maximum concurrent jobs = 20
>> }
>>
>> bacula-sd.conf:
>> Storage {
>> Name = backup-sd
>>
> This name doesn't matter :)
>
>
>> SDAddress = 0.0.0.0
>> SDPort = 9103 # Director's port
>> WorkingDirectory = "/var/bacula/working"
>> Pid Directory = "/var/run"
>> Maximum Concurrent Jobs = 20
>> Heartbeat Interval = 60
>> }
>>
>> #
>> # List Directors who are permitted to contact Storage daemon
>> #
>> Director {
>> Name = backup-dir
>>
> Good.
>
>
>> Password = <password>
>>
> It need to be the same password as defined in bacula-dir.conf Storage
> resources.
>
> }
>>
>
> The most important in this case is the bacula-dir.conf Storage resource
> Address parameter. This parameter is forwarded to the client (FD) as text.
> So client is responsible for address resolving.
>
> So, at your previous thread, you've got a message:
>
>
>> When I try to schedule a full backup I see the following message in the
>> bsonsole:
>>
>> “7827 Full ****.2013-09-13_16.30.23_03 is waiting for Client ***-fd to
>> connect to Storage jukebox”
>
> **
>
> ****
>
> If that was a job which should be performed on 10G private network, then
> your job resource storage parameter is invalid (jukebox) and should be
> corrected into jukebox-p.
>
> I hope it helps.
>
> best regards
> --
> Radosław Korzeniewski
> rados...@korzeniewski.net
>
>
> ------------------------------------------------------------------------------
> LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99!
> 1,500+ hours of tutorials including VisualStudio 2012, Windows 8,
> SharePoint
> 2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack
> includes
> Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13.
> http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
------------------------------------------------------------------------------
LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99!
1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint
2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack includes
Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13.
http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
