On 9/12/13 3:23 PM, "splat" <bacula-fo...@backupcentral.com> wrote:
>New Install here.
>
>installed baucla on a Centos 6.4 , attached to a Quantum LTO-3 changer
>via Scsi
>
>I labeled all the tapes , how ever when I try to run a a job I get the :
>"Cannot find any appendable volumes "
>
>so I mount one manaully ( this tape has never been used other then to
>label ) and nothing changes.
>
>
>Device status:
>Autochanger "TAPEUNIT" with devices:
> "LTO-3" (/dev/nst0)
>Device "LTO-3" (/dev/nst0) is mounted with:
> Volume: MCL438L3
> Pool: FULLTAPE
> Media type: LTO-3
> Device is BLOCKED waiting to create a volume for:
> Pool: FULLTAPE
> Media type: LTO-3
> Slot 1 is loaded in drive 0.
> Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
> Positioned at File=0 Block=0
>
>
>so I put a Brand new tape into the unit , mount it label it and the job
>runs .
>
>what is going on here ? why won't it use exisiting tapes ?
>
>here is my SD.conf
>Autochanger {
> Name=TAPEUNIT
> Device = LTO-3
> Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg3
>}
>Device {
> Name = LTO-3
> Drive Index=0
> Media Type = LTO-3
> Archive Device = /dev/nst0
> AutomaticMount = yes # when device opened, read it
> AlwaysOpen = yes
> RemovableMedia = yes
> RandomAccess = no
> Maximum File Size = 4GB
> Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg3
> AutoChanger = yes
>}
>
>+----------------------------------------------------------------------
>|This was sent by jgoel...@intrinsix.com via Backup Central.
>|Forward SPAM to ab...@backupcentral.com.
>+----------------------------------------------------------------------
What is the output from list volumes?
Patti Clark
Linux System Administrator
Research and Development Systems Support Oak Ridge National Laboratory
------------------------------------------------------------------------------
How ServiceNow helps IT people transform IT departments:
1. Consolidate legacy IT systems to a single system of record for IT
2. Standardize and globalize service processes across IT
3. Implement zero-touch automation to replace manual, redundant tasks
http://pubads.g.doubleclick.net/gampad/clk?id=51271111&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
