Hi James,
Bacula is trying to load the Volume "000061" and it should be in slot 4.
Bacula gets the slot information for a volume from the catalog. You can
check if this volume is in your tape library with a mtx -f /dev/yourchanger
status command. And also you could run an "update slots scan" bconsole
command to update the catalog with the actual information about volumes and
tapes in your tape library.
Regards,
Ana
On Sun, Aug 25, 2013 at 7:14 PM, James Lumby <jlu...@icontrolesi.com> wrote:
> Please forgive my ignorance as I am new to Bacula. I just took over
> this system and I can’t get anything to restore. Any help would be greatly
> appreciated. This is the error that I’m getting.****
>
> * *
>
> 22-Aug 21:38 backup-dir JobId 3795: Start Restore Job
> RestoreFiles.2013-08-22_21.38.12_08****
>
> 22-Aug 21:38 backup-dir JobId 3795: Using Device "Dell-Drive-1"****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3301 Issuing autochanger "loaded? drive
> 0" command.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3302 Autochanger "loaded? drive 0",
> result: nothing loaded.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3301 Issuing autochanger "loaded? drive
> 0" command.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3302 Autochanger "loaded? drive 0",
> result: nothing loaded.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3301 Issuing autochanger "loaded? drive
> 1" command.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3302 Autochanger "loaded? drive 1",
> result: nothing loaded.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3304 Issuing autochanger "load slot 4,
> drive 0" command.****
>
> 22-Aug 21:38 backup-sd JobId 3795: Fatal error: 3992 Bad autochanger "load
> slot 4, drive 0": ERR=Child exited with code 1.****
>
> Results=****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3301 Issuing autochanger "loaded? drive
> 0" command.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3302 Autochanger "loaded? drive 0",
> result: nothing loaded.****
>
> 22-Aug 21:38 backup-sd JobId 3795: Warning: acquire.c:280 Read acquire:
> Requested Volume "000061" on "Dell-Drive-1" (/dev/nst0) is not a Bacula
> labeled Volume, because: ERR=Job failed or canceled.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3301 Issuing autochanger "loaded? drive
> 0" command.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3302 Autochanger "loaded? drive 0",
> result: nothing loaded.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3301 Issuing autochanger "loaded? drive
> 0" command.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3302 Autochanger "loaded? drive 0",
> result: nothing loaded.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3301 Issuing autochanger "loaded? drive
> 1" command.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3302 Autochanger "loaded? drive 1",
> result: nothing loaded.****
>
> 22-Aug 21:38 backup-sd JobId 3795: 3304 Issuing autochanger "load slot 4,
> drive 0" command.****
>
> 22-Aug 21:38 backup-sd JobId 3795: Fatal error: 3992 Bad autochanger "load
> slot 4, drive 0": ERR=Child exited with code 1.****
>
> Results=****
>
> 22-Aug 21:38 backup-fd JobId 3795: Fatal error: job.c:2394 Bad response to
> Read Data command. Wanted 3000 OK data , got 3000 error****
>
> ** **
>
> 22-Aug 21:38 backup-dir JobId 3795: Error: Bacula backup-dir 5.2.9
> (11Jun12):****
>
> Build OS: x86_64-unknown-linux-gnu debian 6.0.5****
>
> JobId: 3795****
>
> Job: RestoreFiles.2013-08-22_21.38.12_08****
>
> Restore Client: backup-fd****
>
> Start time: 22-Aug-2013 21:38:14****
>
> End time: 22-Aug-2013 21:38:24****
>
> Files Expected: 1****
>
> Files Restored: 0****
>
> Bytes Restored: 0****
>
> Rate: 0.0 KB/s****
>
> FD Errors: 1****
>
> FD termination status: Error****
>
> SD termination status: Error****
>
> Termination: *** Restore Error *******
>
> ** **
>
> 22-Aug 21:38 backup-dir JobId 3795: Begin pruning Jobs older than 1 year .
> ****
>
> 22-Aug 21:38 backup-dir JobId 3795: No Jobs found to prune.****
>
> 22-Aug 21:38 backup-dir JobId 3795: Begin pruning Files.****
>
> 22-Aug 21:38 backup-dir JobId 3795: No Files found to prune.****
>
> 22-Aug 21:38 backup-dir JobId 3795: End auto prune.****
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> Thank you,****
>
> James Lumby****
>
> Infrastructure Manager****
>
> *iControl **ESI*****
>
> 972.239.9200 x213 <972.239.9200;213>****
>
> *jlu...@icontrolesi.com*****
>
> www.icontrolesi.com****
>
> DALLAS | SAN FRANCISCO****
>
> ** **
>
> Sent from my iPhone
>
>
> ------------------------------------------------------------------------------
> Introducing Performance Central, a new site from SourceForge and
> AppDynamics. Performance Central is your source for news, insights,
> analysis and resources for efficient Application Performance Management.
> Visit us today!
> http://pubads.g.doubleclick.net/gampad/clk?id=48897511&iu=/4140/ostg.clktrk
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
------------------------------------------------------------------------------
Introducing Performance Central, a new site from SourceForge and
AppDynamics. Performance Central is your source for news, insights,
analysis and resources for efficient Application Performance Management.
Visit us today!
http://pubads.g.doubleclick.net/gampad/clk?id=48897511&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
