On Tue, Jul 02, 2013 at 10:07:16AM -0400, Kevin B. Zimmerman wrote: > > Once I swap the old magazine out (following the instructions at > http://www.bacula.org/en/dev-manual/main/main/Autochanger_Resource.html#SECTION002950000000000000000), > > Bacula refuses to automatically use any tapes in the newly-inserted > magazine. One of the tapes in the old magazine is in Append mode, and > it keeps asking for that tape despite it (and the other tapes from the > old magazine) not being marked as In Changer. I can manually force > Bacula to unmount/update slots/mount and name a specific tape to use, > but once that tape fills up it goes back to asking for the tape from the > other magazine: >
Hi Kevin, we're having the same "problem" although I am unsure if this isn't a feature of bacula trying to preserve data as long as possible. So far, I haven't found a way around bacula trying to mount removed volumes short of manually setting the removed volumes to status "archive". You can check the list archive for what I had hoped "update slots" would achieve, but it only covers certain aspects of what's needed (imho) when juggling around entire cartridges full of tapes. All the best, Uwe ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
