OK just checked on this. When entering this command I get a list of a couple thousand volumes. I think I should invalidate/clear them all. Heading of the table rolls right off the screen so no idea what the numbers mean!
Wouter. On Wed, 2013-05-15 at 12:21 +0200, Radosław Korzeniewski wrote: > Hello, > > > 2013/5/15 Wouter van Marle <wou...@squirrel-systems.com> > Hereby example of a message from a job. It seems to be > recycling a > volume, even though I have set "Recycle = no" in > bacula-dir.conf! > > > Show output of the bconsole command (the pool name is the pool > resource where your recycled volume is assigned, put below a valid > one): > * list media pool=File > > > Then check if recycle parameter is set to '0' or '1' for this > particular volume. If it is setup to '1' then you can update this flag > with "update" command. > > > best regards > -- > Radosław Korzeniewski > rados...@korzeniewski.net ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
