On 6/11/2013 11:10 AM, Leonardo - Mandic wrote: > Hello, > > After upgrade to bacula 5.2.13 I have bacula storage problems. Appers > a network problem, but don't are, I have a gigabit network dedicated > to bacula. The problem is on backups running for many hours or days > (full backup of 500gb delay 2 days, for example). > > The time is random, but 70% of servers have this same errors. > > On old versions never have this problem, and its same network and same > servers of old bacula versions. > > Anybody have this problem on 5.2.13? > > Erroris: > > > 2013-06-10 23:51:01 servert-fd JobId 266: Error: bsock.c:429 Write > error sending 64562 bytes to Storage daemon:10.1.0.60:9103: > ERR=Connection reset by peer > 2013-06-10 23:51:01 servert-fd JobId 266: Fatal error: backup.c:1200 > Network send error to SD. ERR=Connection reset by peer
In my experience, it has always been hardware related. In particular, aggressive power saving modes will cause this when one of the systems cuts power to its Ethernet PHY at an inappropriate time. This can be because the device driver's default is geared toward early power savings and the op hasn't changed it, or a buggy device driver shuts off the PHY when it shouldn't. Bacula requires that TCP connections remain up throughout the job lifetime. Anything that might cause a delay could cause this if the power save timeout for the Ethernet controller is shorter than the delay. For example, if the database server is restarted by a nightly cron job and you are not spooling attributes, then the delay could allow the device driver to shut down the PHY due to "inactivity". ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
