Le 29/03/2013 21:22, unix1988 a écrit : > Hello everyone. I am running Bacula version 5.0.3-1. The hardware > configuration is a HP DL380 attached to a HP MSL4048. The issue I am running > in to is that the tape library inventory and updates slots match but when I > run "list volumes" from the bconsole prompt there are about 6 tapes that are > inside the library that do not show up in the output. These are tapes that > were part of a brand new batch so they were not known to the catalog > previously. > > I've tried the following with no luck: > update slots scan > labeling the tapes (responds with an error stating the tapes are already > labeled) > shutting down the library and restarting bacula > > Thanks. >
Hi If your tape are blank or if you don't care about the jobs which are on it: shutdown bacula mount one tape in the drive mt -f /dev/nst0 rewind mt -f /dev/nst0 weof start bacula label You have to do that for all your invisible tapes...I had the same problem. regards ------------------------------------------------------------------------------ Own the Future-Intel(R) Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://altfarm.mediaplex.com/ad/ck/12124-176961-30367-2 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
