On 13. Feb, 2013, at 10:54 PM, Cristian Livadaru <crist...@lcx.at> wrote:
> I have a issue I can't seem to figure out.
> configured a bacula server v5.2.12 and a first client, both running Debian
> Squeeze
>
> Client {
> Name = client1.foo.com-fd
> Address = client1.foo.com
> FDPort = 9102
> Catalog = MyCatalog
> Password = "very secret"
> File Retention = 30 days
> Job Retention = 6 months
> AutoPrune = yes
> }
>
> Job {
> Name = "Backup client1.foo.com"
> Client = client1.foo.com-fd
> JobDefs = "DefaultJob"
> Write Bootstrap = "/var/lib/bacula/client1.foo.com.bsr"
> }
>
>
> The Backup for this client is working just fine.
> I then copied this config and installed the same bacula version on a second
> client.
>
> Client {
> Name = client2.foo.com-fd
> Address = client2.foo.com
> FDPort = 9102
> Catalog = MyCatalog
> Password = "other secret pass"
> File Retention = 30 days
> Job Retention = 6 months
> AutoPrune = yes
> }
>
> Job {
> Name = "Backup client2.foo.com"
> Client = client2.foo.com-fd
> JobDefs = "DefaultJob"
> Write Bootstrap = "/var/lib/bacula/client2.foo.com.bsr"
> }
>
> but this one doesn't work.
>> From bcsonsole I tried to estimate a backup and I just receive an error.
>
> 13-Feb 22:20 backup.domain.com-dir JobId 0: Fatal error: Error sending Hello
> to File daemon at "client2.foo.com:9102". ERR=Connection reset by peer
> 13-Feb 22:21 backup.domain.com-dir JobId 0: Fatal error: Unable to
> authenticate with File daemon at "client2.foo.com:9102". Possible causes:
> Passwords or names not the same or
> Maximum Concurrent Jobs exceeded on the FD or
> FD networking messed up (restart daemon).
> Please see
> http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000
> for help.
>
> funny thing is, as soon as I do a estimate for client 2, I can't do a
> estimate for client 1 anymore!
> I always keep getting the error message for client 2!
> If I restart the director, estimate for client 1 works again until I do a
> estimate for client 2.
>
> I started fd with debug level 999 on client2 and this is what I got:
>
> client2.foo.com-fd: bnet.c:766-0 who=client host=214.15.107.22 port=9102
> client2.foo.com-fd: jcr.c:904-0 set_jcr_job_status(*System*, C)
> client2.foo.com-fd: jcr.c:913-0 OnEntry JobStatus=client2.foo.com-fd:
> jcr.c:924-0 Set new stat. old: client2.foo.com-fd: jcr.c:929-0 leave
> setJobStatus old=client2.foo.com-fd: find.c:81-0 init_find_files ff=16789d8
> client2.foo.com-fd: job.c:270-0 <dird: Hello Director backup.foo.com-dir
> calling
> client2.foo.com-fd: job.c:286-0 Executing Hello command.
> client2.foo.com-fd: job.c:436-0 Calling Authenticate
> client2.foo.com-fd: message.c:1255-0 Enter Jmsg type=3
> client2.foo.com-fd: message.c:725-0 Enter dispatch_msg type=3
> msg=client2.foo.com-fd: Fatal Error at authenticate.c:208 because:
> Unable to authenticate Director
> client2.foo.com-fd: message.c:924-0 DIRECTOR for following msg:
> client2.foo.com-fd: Fatal Error at authenticate.c:208 because:
> Unable to authenticate Director
> client2.foo.com-fd: message.c:929-0 no jcr for following msg:
> client2.foo.com-fd: Fatal Error at authenticate.c:208 because:
> Unable to authenticate Director
> client2.foo.com-fd: job.c:289-0 Quit command loop. Canceled=0
> client2.foo.com-fd: runscript.c:108-0 runscript: running all RUNSCRIPT object
> (ClientAfterJob) JobStatus=C
> client2.foo.com-fd: job.c:399-0 Calling term_find_files
> client2.foo.com-fd: job.c:404-0 Done with term_find_files
> client2.foo.com-fd: runscript.c:286-0 runscript: freeing all RUNSCRIPTS object
> client2.foo.com-fd: message.c:503-0 Close_msg jcr=1678088
> client2.foo.com-fd: message.c:503-0 Close_msg jcr=0
> client2.foo.com-fd: message.c:523-0 ===Begin close msg resource at 165c188
> client2.foo.com-fd: message.c:608-0 Done walking message chain.
> client2.foo.com-fd: message.c:615-0 ===End close msg resource
> client2.foo.com-fd: job.c:406-0 Done with free_jcr
> client2.foo.com-fd: mem_pool.c:375-0 garbage collect memory pool
>
>
> as far as I can't see why it's Unable to authenticate Director but I have no
> clue why.
> Any hints please?
>
> Cris
> ------------------------------------------------------------------------------
Found it, I was really blind yesterday. Looking exactly at the error and
couldn't see the difference between client1 and client2.
On client1 I set the director name correctly to backup.foo.com on client2 I
left it as it was installed, client2.foo.com which can not work!
Everything works as expected now.
Cris
------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
