Hello,
2013/2/8 "Jürgen Ecker" <trex...@gmx.de>
> Hi,
>
> if i start a job in bacula which should write to a tape library, then i
> get the following error.
>
> Fatal error: Device reservation failed for JobId=83: 1998 Volume
> "VolServer-0374" status is Append, not in Pool.
>
> Storage daemon didn't accept Device "Tape" because:
> 3924 Device "Tape" not in SD Device resources.
>
> Here my configs:
>
> bacula-dir.conf
>
> Storage {
> Name = Autochanger
> Address = 10.0.0.10
> SDPort = 9103
> Password = "password"
> Device = Tape
> Autochanger = yes
> Media Type = LT0
> }
>
This is Media Type LT"Zero"
>
> Pool {
> Name = Tape
> Pool Type = Backup
> Recycle = yes
> AutoPrune = yes
> Volume Retention = 28 days
> Maximum Volume Bytes = 4G
> Maximum Volumes = 1000
> }
>
> bacula-sd.conf
>
> Autochanger {
> Name = Tape
> Device = LTO-4
> Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg3
> }
>
> Device {
> Name = LTO-4
> Drive Index = 0
> Media Type = LTO
> Archive Device = /dev/nst0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
> Label Media = no
> }
>
Here we have Media Type LTO, which did not match above definitions.
Please correct it and check again.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
