Dear Stephen Thompson,
In message <50982f94.10...@seismo.berkeley.edu> you wrote:
> On 11/05/2012 01:17 PM, Josh Fisher wrote:
> >
> > On 11/5/2012 11:03 AM, Stephen Thompson wrote:
...
> > When you start the jobs manually, I assume you are starting them at
> > different times. This works, because the first job is up and running
> > with the volume loaded before the second job begins its selection
> > process. One way to handle this issue is to have a different Schedule
> > for each job and start the jobs at different times with one second
> > spacing. Jobs will still run concurrently, they just won't start up
> > concurrently.
>
> I suspected something like that, but would ask out loud "if bacula runs
> into a contention like that and there are other available volumes in the
> requested pool, why doesn't it decide to use another volume instead of
> blocking?"
I'm not sure about this. I see very similar problems when trying to
use the second drive for other purposes, like labelling new tapes,
while a job is running on the first one, like this:
*label dummy pool=ARCH storage=LTOLIB drive=1 slots=25 barcodes
Connecting to Storage daemon LTOLIB at ltos.denx.de:9103 ...
3306 Issuing autochanger "slots" command.
Device "LTO3-0" has 48 slots.
Connecting to Storage daemon LTOLIB at ltos.denx.de:9103 ...
3306 Issuing autochanger "list" command.
The following Volumes will be labeled:
Slot Volume
==============
25 SAV000L3
Do you want to label these Volumes? (yes|no): yes
Connecting to Storage daemon LTOLIB at ltos.denx.de:9103 ...
Sending label command for Volume "SAV000L3" Slot 25 ...
3937 Device ""LTO3-0" (/dev/tape/by-id/scsi-35000e11802947001-nst)" is busy
with writers=1 reserved=0.
Label command failed for Volume SAV000L3.
with:
Device {
Name = LTO3-0
Media Type = LTO-3
Archive Device = /dev/tape/by-id/scsi-35000e11802947001-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Maximum File Size = 5GB
Maximum Block Size = 512K
Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/tape/by-id/scsi-1BDT_FlexStor_II_00DE64100465_LL0
AutoChanger = yes
# Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo
# Alert Command = "sh -c 'smartctl -H -l error %c'"
# Spool Data to disk before writing to tape
Spool Directory = /backup/spool
Maximum Spool Size = 5120GB
Maximum Job Spool Size = 5120GB
}
Device {
Name = LTO3-1
Media Type = LTO-3
Archive Device = /dev/tape/by-id/scsi-35000e11802947004-nst
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Maximum File Size = 5GB
Maximum Block Size = 512K
Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/tape/by-id/scsi-1BDT_FlexStor_II_00DE64100465_LL0
AutoChanger = yes
# Enable the Alert command only if you have the mtx package loaded
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo
Alert Command = "sh -c 'smartctl -H -l error %c'"
# Spool Data to disk before writing to tape
Spool Directory = /backup/spool
Maximum Spool Size = 5120GB
Maximum Job Spool Size = 5120GB
}
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Drawing on my fine command of language, I said nothing.
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_nov
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
