It's the version that is in ubuntu 10.04 repos and I can't update the
system right now.
My storage array with raid6 can write up to 400MB/s and trough the
network up to 100MB/s (Gigabit), these speeds were tested and confirmed
and I don't use firewall between bacula-server and clients.
I din't set spool attributes, can it increase speed? How? Sorry I'm new
to bacula.
f I simple send the same files to be backed up with scp for example the
transfer goes around 100MB/s, so I don't think I'm using an emulated
storage and network I/O.
Citando Radosław Korzeniewski <rados...@korzeniewski.net>:
Hello,
2012/9/27 Rodrigo Abrantes Antunes <rodrigoantu...@pelotas.ifsul.edu.br>
Citando Davide Franco <dfra...@dflc.ch>:
On Thu, Sep 27, 2012 at 7:04 PM, Rodrigo Abrantes Antunes
<rodrigoantu...@pelotas.ifsul.edu.br> wrote:
Hi, I'm having extremely slow performance when backing up, a 10gb
backup took around 3h.
It is about 1MB/s.
Where should I start looking?
In various places. :)
During a backup I can see bacula-sd using 100% cpu, memory usage
is normal. My system is a vmware virtual machine with a cpu with
two 2,5ghz cores and 2gb ram. The vm have a separate partition
for the volumes using ext4 and mounted via RDM in a fc storage
array with raid6. I tried mapping more cores and more ram for the
vm with the same result so I don't think the problem is lack of
resources.
Thanks.
Director: 5.0.1-1ubuntu1
Storage: 5.0.1-1ubuntu1
It is fairly old version of Bacula. Is it possible to upgrade?
FD: 5.0.1-1ubuntu1 (some clients have lower version)
Database: mysqI
OS: Ubuntu 10.04.4 x64 Server
FC Storage 4 GBits/s.
All my network is Gigabit Ethernet.
First you have to check if your storage server is able to write
data to disk fast enough. You can do a test with a simple dd
if=/dev/zero of=/your-storage-filesystem bs=65536.
Second you have to check if you set Spool Attributes = yes in your
job, if not change it. You'll have to setup a spool directory for
your device too.
Next check a network speed. What is your RTT between client and
storage daemon? I know it is a 1Gbit, but it is possible that you
cannot utilize so much. You can test with a simple ftp client. Is it
possible that you have a Firewall between both servers?
Last you have to check a client utilization and filesystem read
speed. How many small files you have to backup? Every new file to
backup has its own overhead. Bacula has to find this file, stat it,
open it, read data from it (with 64k block) and finally close it. If
you have a 10M files of 1kB then your backup will be much slower
then 1 file of 10GB. You have to be aware of it.
One question: can vmware tools have any influence in this case?
From what I know vmware tools is mainly for better graphics
performance isn't it? I din't installed it.
It is possible that without vmware tools you are using an emulated
storage and network I/O instead of much faster virtualized.
best regards
--
Radosław Korzeniewski
rados...@korzeniewski.net
------------------------------------------------------------------------------
Got visibility?
Most devs has no idea what their production app looks like.
Find out how fast your code is with AppDynamics Lite.
http://ad.doubleclick.net/clk;262219671;13503038;y?
http://info.appdynamics.com/FreeJavaPerformanceDownload.html
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
