http://www.mytapelabels.com/index2.html made the trick... now I need to get the paper for printing them... its a bit hard to get the NetC LLC paper sheet here in Argentina... Will see if I can get something similar and cut the rest with a scissor.
Thanks a lot! On Thu, Aug 23, 2012 at 10:08 AM, Alan Brown <a...@mssl.ucl.ac.uk> wrote: > On 23/08/12 13:57, Horacio Lo Brutto wrote: >> >> Hi list! >> >> I was looking for any kind soul who knows how to get the BarCodes >> printed in my LTO5 cartdriges! Its proving difficult to get it done!. >> Any of you who knows a site / tool to do it? > > > There are a couple of tools for generating labels for laser sheets. > > Otherwise, a Brother TZ-labeller prints type 39 narrow barcodes on TZ-241 > 18mm laminated tapes which are a good fit (16mm would be better but isn't > made) and readable in almost all robots. The labellers have a nifty function > where they can print up to 100 sequentially numbered labels at a time. > > > >> BTW, Searching another stuff on google I found that TS3100 (IBM Tape >> Drive with Auto Changer) works just fine with Bacula (as per the posts >> I've read) so wanted to say that out loud since I asked last week. >> >> >> Thanks a lot in advance ! >> > > > -- -Jorixine- ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
