On 2012-08-02 09:32, John Drescher wrote:
> On Thu, Aug 2, 2012 at 9:39 AM, dweimer <dwei...@dweimer.net> wrote:
>> I have been doing some searching, but I am apparently not searching
>> on
>> the right key words, and can't seem to find out how to enable
>> multiple
>> jobs to run simultaneously. I am running my backups to Disk only
>> and
>> not tape, so I do have random access media, and also knowing that
>> running multiple jobs to the volume may slow down restores. The
>> problem
>> that I am trying to solve is a slow link to one of the machines, it
>> takes a several hours to backup, so I need to start it early, but
>> don't
>> want to make the remaining server have to wait for it to complete
>> before
>> executing their backups. Some of the faster machines are fairly
>> large
>> volume and may take up to an hour so I would rather not just run
>> them
>> first delaying the slow machines start for a couple of hours.
>>
>> I know there are some Max Concurrent Jobs settings, not sure if I am
>> just missing one of those or if I need to add more storage
>> devices/pools
>> possibly a spool area, etc. I have made sure to configure the
>> priorities correctly (since in my searching I have found that it
>> will
>> only run same priority jobs at same time, which makes sense) so the
>> main
>> backup jobs are one priority, a few less critical servers another,
>> and
>> then the catalogue backup set to run last.
>>
>> If anyone knows of some documentation that describes all the steps
>> is
>> necessary to allow multiple jobs at once, and can direct me to it,
>> that
>> would be great.
>
> The manual does describe all of the steps necessary although maybe
> not
> in one single place.
>
> At minimum you need to set "Max Concurrent Jobs" for the director,
> storage and possibly client resource of bacula-dir.conf. Also
> remember
> that a single storage device (even a disk) can only load 1 volume at
> a
> time. So that if you have multiple jobs going to different volumes
> you
> can not use a single storage device. Also you need to have all jobs
> at
> the same priority if you want to run them concurrently. If jobs are
> at
> different priorities they will preempt jobs at lower priorities.
>
> John
From the Tips and tricks section of the problem resolution guide, I
have set the director, storage, client, and job resources all to use Max
concurrent Jobs = 4, I have also set the device under the bacula-sd.conf
to have a Max Concurrent Jobs = 4, as I found that was a new feature in
the 5.0 branch from the documentation. The file daemons and storage
daemon, were already set to 20 max concurrent jobs. I don't believe that
I need the entries under Job and Client, as I only intend to run one job
per client and job, but I figured for testing I would start with them in
there. The jobs I am testing with are both set to the same priority. I
have reloaded the director, and restarted the storage daemon to get the
new configurations read.
I then fired off 2 jobs, and no luck the second job reports waiting
execution, and executes as soon as the first job finishes. Is there any
way to get a more detailed report of why the job is waiting execution,
to see if I can find out what I am missing from that.
I know that in the long run it would be better to have separate devices
and pool definitions, but as it appears to be technically possible
without doing this, I would at least like to prove it will work before I
add even more complexity to the configuration, of course if its not
possible I don't have a choice, but as the volumes are file based on
disk I know I will take a hit in restore performance by writing 2 jobs
at a time to the volume, but at this point that’s an acceptable down
side. If I was writing to tape, I would think differently about that
performance hit, as it would be much greater if that were the case.
--
Thanks,
Dean E. Weimer
http://www.dweimer.net/
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
