On Tue, Jun 05, 2012 at 02:37:56PM -0700, Steve O'Brien wrote: > I had a fully working 5.0.1 installation with my Quantum Scalar i40 library > that has 2 drives, after upgrading to 5.2.3 my backups started failing, I > then upgraded to 5.2.6 hoping that something had been fixed no such luck. > > What it looks like is that bacula is not properly unloading the tape, or not > waiting long enough and then it is putting the autoloader into an error state: > A host issued a SCSI Prevent/Allow Media Removal command which is preventing > the drive from unloading a tape cartridge. > > I can operate the loader and drive manually using mtx and mt. > > Has anyone had problems with 5.2.X and their autochanger, I have tried some > of the settings in mtx-changer.conf but nothing seems to help
Hi Steve, have to tried fiddling with the max changer wait variable? I had to adjust this one recently when we installed a new changer that took a while longer to change tapes. All the best, Uwe ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
