Le 19/04/2012 09:47, alexturner a écrit : > Hey all, > > I'm trying to set up a bacula sever to backup all machines on the network to > LTO tape. I'm having a hard time getting my config to work. For starters > bacula-dir wont start from the /etc/init.d/bacula-director script but it will > start if I simply run bacula-dir in the terminal. > > bacula-sd runs from the init script and is listening on all ip's (as > determined by netstat -alnp) though I can't connect to it. I've been trying > to run this for the last few weeks and I'm starting to give up, any ideas and > input would be highly appreciated. > > I've edited out a fair bit of text just to shorten the output. Sorry for not > uploading to a pastebin. > > Netstat: > root@bacula:/var/www# netstat -alnp | grep 9103 > tcp 0 0 0.0.0.0:9103 0.0.0.0:* LISTEN > 17140/bacula-sd > root@bacula:/var/www# > > Error: > *status > Status available for: > 1: Director > 2: Storage > 3: Client > 4: All > Select daemon type for status (1-4): 2 > Automatically selected Storage: bacula > Connecting to Storage daemon bacula at 127.0.0.1:9103 > > Failed to connect to Storage daemon bacula. > ==== > You have messages. > *messages > 19-Apr 17:38 localhost-dir JobId 0: Fatal error: authenticate.c:120 Director > unable to authenticate with Storage daemon at "127.0.0.1:9103". Possible > causes: > Passwords or names not the same or > Maximum Concurrent Jobs exceeded on the SD or > SD networking messed up (restart daemon). > Please see > http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 > for help. > * > > > > bacula-sd.conf > Storage { # definition of myself > Name = bacula > SDPort = 9103 # Director's port > WorkingDirectory = "/var/lib/bacula" > Pid Directory = "/var/run/bacula" > Maximum Concurrent Jobs = 20 > } > > # > # List Directors who are permitted to contact Storage daemon > # > Director { > Name = bacula-dir > Password = "helloworld" > } > > # > # Restricted Director, used by tray-monitor to get the > # status of the storage daemon > # > Director { > Name = bacula-mon > Password = "helloworld" > Monitor = yes > } > > Autochanger { > Name = HP-Changer > Device = LTO1-1 > Device = LTO1-2 > Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" > Changer Device = /dev/sg2 > } > > Device { > Name = LTO1-1 # > Drive Index = 0 > Media Type = LTO-1 > Archive Device = /dev/st0 > AutomaticMount = yes; # when device opened, read it > AlwaysOpen = yes; > RandomAccess = no; > AutoChanger = yes > # # > # # Enable the Alert command only if you have the mtx package loaded > # # Note, apparently on some systems, tapeinfo resets the SCSI controller > # # thus if you turn this on, make sure it does not reset your SCSI > # # controller. I have never had any problems, and smartctl does > # # not seem to cause such problems. > # # > # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" > # If you have smartctl, enable this, it has more info than tapeinfo > # Alert Command = "sh -c 'smartctl -H -l error %c'" > } > Messages { > Name = Standard > director = bacula-dir = all > } > > > Bacula-dir.conf > Director { # define myself > Name = localhost-dir > DIRport = 9101 > QueryFile = "/etc/bacula/scripts/query.sql" > WorkingDirectory = /var/lib/bacula > PidDirectory = "/var/run/bacula" > Maximum Concurrent Jobs = 1 > Password = "tralala" # Console password > Messages = Daemon > DirAddress = 127.0.0.1 > } > > JobDefs { > Name = "DefaultJob" > Type = Backup > Level = Incremental > Client = bacula-fd > FileSet = "Full Set" > Schedule = "WeeklyCycle" > Storage = bacula > Messages = Standard > Pool = File > Priority = 10 > Write Bootstrap = "/var/lib/bacula/%c.bsr" > } > > > # > # Define the main nightly save backup job > # By default, this job will back up to disk in > /nonexistant/path/to/file/archive/dir > Job { > Name = "BackupClient1" > JobDefs = "DefaultJob" > } > Storage { > Name = bacula > Address = 127.0.0.1 > SDPort = 9103 > Password = "KM0K1W1aF6w-G0NU181dVtedFUKDKn4QE" > Device = HP-Changer > Media Type = LTO-1 > Autochanger = yes > } > > Catalog { > Name = MyCatalog > # Uncomment the following line if you want the dbi driver > dbdriver = "dbi:mysql"; dbaddress = 127.0.0.1; dbport = 3306; > dbname = "bacula" > dbuser = "root" > dbpassword = "alexwashere" > } > > +---------------------------------------------------------------------- > |This was sent by alexandertur...@me.com via Backup Central. > |Forward SPAM to ab...@backupcentral.com. > +---------------------------------------------------------------------- > > > > ------------------------------------------------------------------------------ > For Developers, A Lot Can Happen In A Second. > Boundary is the first to Know...and Tell You. > Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! > http://p.sf.net/sfu/Boundary-d2dvs2 > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users
Hello, Your director's name is not the same in your files. Passwords are not the same neither. In bacula-sd.conf, your director's password has to match the Storage's one in bacula-dir.conf. HTH. Jerome Blion. ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
