You could try with Bacula 5.2.6 in case there is a bug fix.
__Martin
>>>>> On Wed, 28 Mar 2012 15:44:37 +0200 (CEST), Juan Diaz said:
>
> Pablo,
>
> I have tried all day with your configuration and it doesn't work. Could you
> please send me the complete configuration for search the differences between
> the two of them.
>
> We work with Bacula 5.0.2 and linux debian 2.6.32-5-amd64.
>
> Also I tried deduplication with the same machine I did first base after full
> and lately differential and the differential was smaller. But when I use that
> base with another machine the differential is bigger than full backup and
> that doesn't make sense.
>
> I CC the group in case there's someone who had the same trouble.
>
> Thank you very much four your help,
>
>
> Juan David DIAZ
> INSA de Lyon
> Universidad ICESI
> +33 6 49 59 23 86
>
>
> ----- Mail original -----
> De: "Juan Diaz" <juan.d...@insa-lyon.fr>
> À: "Pablo Marques" <pmarq...@miamilinux.net>
> Cc: "José Frederico" <jose.freder...@callide.fr>,
> bacula-users@lists.sourceforge.net
> Envoyé: Mercredi 28 Mars 2012 09:47:23
> Objet: Re: [Bacula-users] Question
>
> Thank you Pablo but it didn't worked. The incremental or differential
> continues being bigger than the full backup.
>
> Juan David DIAZ
> INSA Lyon
> Universidad ICESI
> +33 6 49 59 23 86
>
>
> ----- Mail original -----
> De: "Pablo Marques" <pmarq...@miamilinux.net>
> À: "Juan Diaz" <juan.d...@insa-lyon.fr>
> Cc: "José Frederico" <jose.freder...@callide.fr>,
> bacula-users@lists.sourceforge.net
> Envoyé: Mardi 27 Mars 2012 17:40:41
> Objet: Re: [Bacula-users] Question
>
> Juan:
>
> That is no happening to us and the only obvious difference between our set up
> and yours is in the fileset definition.
>
> Can you remove these lines in your fileset and give it a try?
> BaseJob = pmugcs5
> Accurate = mcs
> Verify = pin5
>
> This is our fileset:
>
> FileSet {
> Name = "Root-set"
> Include {
> Options {
> signature = MD5
> compression = LZO
> Sparse = yes
> aclsupport = yes
> xattrsupport = yes
> }
> File = /
> }
> }
>
> Good luck
>
> Pablo
>
> ----- Original Message -----
> From: "Juan Diaz" <juan.d...@insa-lyon.fr>
> To: bacula-users@lists.sourceforge.net
> Cc: "José Frederico" <jose.freder...@callide.fr>
> Sent: Tuesday, March 27, 2012 9:35:27 AM
> Subject: [Bacula-users] Question
>
> Hello,
>
> Right now we're evaluating and deciding which is going to be our Backup
> software, Bacula is the most optioned so far but we're having troubles with
> the implementation of the file DE duplication.
>
> When we make a base job of the machine virtual that is going to be the base,
> his size is 553 Mb. After that when we make a full backup of a machine that
> was created from the machine "base". His size is 242 Mb that’s ok because it
> only has to make backup of the files that are different of files of the base.
>
> The problem comes when we make a differential backup right after the full
> backup. The result must be 0 Mb or something really small, but we're getting
> backups of 462 Mb.
>
> We used one configuration similar to the one we found in the Bacula’s manual.
> http://www.bacula.org/5.2.x-manuals/en/main/main.pdf Chapter 34.
>
> We have tried removing BaseJob, Accurate and Verify from FileSet but it
> didn’t worked. We have always the same sizes that don't make sense.
>
> We would like to know if you have a solution for our problem, because it
> worked when we don't use DE duplication (just with full and Differential),
> but we are very interested in using it, that would save us a lot of space on
> ours hard drives.
>
> We attached here the job’s configuration:
>
> ob {
> Name = "BackupBasse"
> Type = Backup
> Level = Base
> Client = basse-fd
> FileSet = "TOUT"
> Schedule = "programme2"
> Storage = File
> Messages = Standard
> Pool = File
> Priority = 10
> Write Bootstrap = "/var/lib/bacula/%c.bsr"
> }
> Schedule{
> Name = "programme2"
> Run = at 14:30
> }
>
> Job {
> Name = "Backupftp"
> Type = Backup
> Base = Backupftp, BackupBasse
> Accurate=yes
> Client = basseftp-fd
> FileSet = "TOUT"
> Schedule = "programme"
> Storage = File
> Messages = Standard
> Pool = File
> Priority = 10
> Write Bootstrap = "/var/lib/bacula/%c.bsr"
> }
>
> Schedule{
> Name = "programme"
> Run = Level=Full at 14:31
> Run = Level=Incremental at 14:32
>
> }
>
> FileSet {
> Name = "TOUT"
> Include {
> Options {
> BaseJob = pmugcs5
> Accurate = mcs
> Verify = pin5
> }
> File = /
> }
> }
>
> Thank you very much for your help,
>
> Juan David DIAZ
>
> ------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
> ------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
